Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


Shells Virtual Desktop
BMail.ag - Secure Email Service
Server.net
CPLicense.net
VPS Server
Buy VPN
Vultr
VMs for AI
HostDare
ReliableSite White-Label Dedicated Hosting for Resellers
InterServer VPS
BMail.ag - Secure Email Service
Best VPN
High-Performance Bare Metal Server Solutions
Karvl.com
Server Mania Cloud Hosting
DataWagon Hosting
AlphaVPS Hosting
Evoxt.com
Clouvider
VPS Hosting with NVMe
Residential IPs in the US & 4G Mobile Proxies in EU & US with Unlimited Bandwidth
ReliableSite White-Label Dedicated Hosting for Resellers
Rabisu - Hosting Solutions
Shells Virtual Desktop
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

SPANKING NEW DEALS! HAPPY NEW YEAR w/ PREMIUM GIVEAWAYS! FREEBIES GALORE by RackNerd.

17747757777797801047

Comments

  • @MrEd said:

    @Beniskickbutt said:

    @noob404 said:

    @BasToTheMax said:
    Only 5 pages for 777

    Hella yah..who wants to get lucky?

    who will be the first one to post on 777? The luck shall be theirs!

    I'm on the phone, not going to make it to be first... :)

    me!

  • And here we are!

  • Yay, i'm first!

  • @noob404 We're at 777 now

  • @BlazinDimes said:

    @noob404 said:

    @BlazinDimes said:

    @Beniskickbutt said:

    @BlazinDimes said:

    @noob404 said:

    @BlazinDimes said:

    @noob404 said:

    @PuDLeZ said:

    @noob404 said:

    @PuDLeZ said:

    @noob404 said:
    And, can your parents do remote hands if you need to check something physically?

    My dad no, my mom has some knowledge that I can call. Worst case, I do have a pikvm there where I can ask her to connect the hdmi and usb cables so I can further troubleshoot if I can't access the device over the network (do have a site-to-site vpn between my lan and theirs)

    Oh that's actually a great setup you have there. Also for connecting are you using plain old SSH or do you have a VPN as well like Tailscale or something?

    I just use ssh and vnc/rdp as needed. Sometimes I do use the pikvm depending on what actually needs to be done. If I'm at home, I can just target those machines directly. If I'm away from home, I either vpn into my home network (then target them) or I will ssh in and tunnel the required ports.

    Ah ok. I am planning to Tailscale my home connection. Still trying to figure out the specifics of DNS as I have a dynamic IP at home.

    When using the Tailscale network you can use the built in DNS, and use the domains they provide. I generally just copy/paste the Tailscale IP from the app though as it's super convenient.

    Oh didnt know this was possible. So, Tailscale gives out domains even on the free plans?

    They're just local addresses that you can use while connected to the Tailscale network, of course. It's like having a LAN but all the devices are scattered over the internet.

    Ah got it. So its not entirely the same. Interesting. I'll have to check it out. Almsot vpn ish

    It's a Wireguard based mesh-vpn system.

    Tailscale is wg based?

    Yes! That's what makes it so dang fast.

    https://tailscale.com/kb/1035/wireguard

    Oh didnt know this. Thanks.

  • @BasToTheMax said:

    @noob404 said:

    @BlazinDimes said:

    @Beniskickbutt said:

    @BlazinDimes said:

    @noob404 said:

    @BlazinDimes said:

    @noob404 said:

    @PuDLeZ said:

    @noob404 said:

    @PuDLeZ said:

    @noob404 said:
    And, can your parents do remote hands if you need to check something physically?

    My dad no, my mom has some knowledge that I can call. Worst case, I do have a pikvm there where I can ask her to connect the hdmi and usb cables so I can further troubleshoot if I can't access the device over the network (do have a site-to-site vpn between my lan and theirs)

    Oh that's actually a great setup you have there. Also for connecting are you using plain old SSH or do you have a VPN as well like Tailscale or something?

    I just use ssh and vnc/rdp as needed. Sometimes I do use the pikvm depending on what actually needs to be done. If I'm at home, I can just target those machines directly. If I'm away from home, I either vpn into my home network (then target them) or I will ssh in and tunnel the required ports.

    Ah ok. I am planning to Tailscale my home connection. Still trying to figure out the specifics of DNS as I have a dynamic IP at home.

    When using the Tailscale network you can use the built in DNS, and use the domains they provide. I generally just copy/paste the Tailscale IP from the app though as it's super convenient.

    Oh didnt know this was possible. So, Tailscale gives out domains even on the free plans?

    They're just local addresses that you can use while connected to the Tailscale network, of course. It's like having a LAN but all the devices are scattered over the internet.

    Ah got it. So its not entirely the same. Interesting. I'll have to check it out. Almsot vpn ish

    It's a Wireguard based mesh-vpn system.

    Tailscale is wg based?

    Yes, tailscale uses wireguard under the hood

    Thanks buddy. I thought it was a totally different protocol altogether.

    Thanked by 1BlazinDimes
  • I am on page 700, on page 777... Goals achieved, probably its time to focus somewhere else :)

  • Now where are the lucky giveaways?

  • Can I draw a 777 there?

  • @MrEd said:
    I am on page 700, on page 777... Goals achieved, probably its time to focus somewhere else :)

    Maybe some focus here as well

  • @BasToTheMax said:
    Now where are the lucky giveaways?

    Will be here soon..don't forget to hype

  • 777 - WHO NEEDS LUCK WHEN WE GOT RACKNERD !!!

  • @BasToTheMax said:
    Now where are the lucky giveaways?

    Chef only comes here when I am away :D He will come back soon... :D

    Thanked by 1chitree
  • BasToTheMaxBasToTheMax Member
    edited January 2025

    Only 223 pages left for 1k
    And only 7k pages left for 7777 :D

  • Damn didn't even realise that we were already at 777! :lol:

  • @noob404 said:
    Damn didn't even realise that we were already at 777! :lol:

    :D

  • I will be on phone now

  • @noob404 said:

    @BlazinDimes said:

    @noob404 said:

    @BlazinDimes said:

    @Beniskickbutt said:

    @BlazinDimes said:

    @noob404 said:

    @BlazinDimes said:

    @noob404 said:

    @PuDLeZ said:

    @noob404 said:

    @PuDLeZ said:

    @noob404 said:
    And, can your parents do remote hands if you need to check something physically?

    My dad no, my mom has some knowledge that I can call. Worst case, I do have a pikvm there where I can ask her to connect the hdmi and usb cables so I can further troubleshoot if I can't access the device over the network (do have a site-to-site vpn between my lan and theirs)

    Oh that's actually a great setup you have there. Also for connecting are you using plain old SSH or do you have a VPN as well like Tailscale or something?

    I just use ssh and vnc/rdp as needed. Sometimes I do use the pikvm depending on what actually needs to be done. If I'm at home, I can just target those machines directly. If I'm away from home, I either vpn into my home network (then target them) or I will ssh in and tunnel the required ports.

    Ah ok. I am planning to Tailscale my home connection. Still trying to figure out the specifics of DNS as I have a dynamic IP at home.

    When using the Tailscale network you can use the built in DNS, and use the domains they provide. I generally just copy/paste the Tailscale IP from the app though as it's super convenient.

    Oh didnt know this was possible. So, Tailscale gives out domains even on the free plans?

    They're just local addresses that you can use while connected to the Tailscale network, of course. It's like having a LAN but all the devices are scattered over the internet.

    Ah got it. So its not entirely the same. Interesting. I'll have to check it out. Almsot vpn ish

    It's a Wireguard based mesh-vpn system.

    Tailscale is wg based?

    Yes! That's what makes it so dang fast.

    https://tailscale.com/kb/1035/wireguard

    Oh didnt know this. Thanks.

    With as much as I talk it up, you'd almost think I was sponsored, but it really just makes my life so much easier. :p

    Thanked by 1noob404
  • Okay everyone. I am a zombie at this point. I will see you all tomorrow then. Wdyt?

  • @BasToTheMax said:
    I will be on phone now

    Join the club

  • @noob404 said:
    Okay everyone. I am a zombie at this point. I will see you all tomorrow then. Wdyt?

    Bye. See ya tomorrow

  • @noob404 said:
    Okay everyone. I am a zombie at this point. I will see you all tomorrow then. Wdyt?

    Have a good sleep! ;)

  • @BlazinDimes said:

    @noob404 said:

    @BlazinDimes said:

    @noob404 said:

    @BlazinDimes said:

    @Beniskickbutt said:

    @BlazinDimes said:

    @noob404 said:

    @BlazinDimes said:

    @noob404 said:

    @PuDLeZ said:

    @noob404 said:

    @PuDLeZ said:

    @noob404 said:
    And, can your parents do remote hands if you need to check something physically?

    My dad no, my mom has some knowledge that I can call. Worst case, I do have a pikvm there where I can ask her to connect the hdmi and usb cables so I can further troubleshoot if I can't access the device over the network (do have a site-to-site vpn between my lan and theirs)

    Oh that's actually a great setup you have there. Also for connecting are you using plain old SSH or do you have a VPN as well like Tailscale or something?

    I just use ssh and vnc/rdp as needed. Sometimes I do use the pikvm depending on what actually needs to be done. If I'm at home, I can just target those machines directly. If I'm away from home, I either vpn into my home network (then target them) or I will ssh in and tunnel the required ports.

    Ah ok. I am planning to Tailscale my home connection. Still trying to figure out the specifics of DNS as I have a dynamic IP at home.

    When using the Tailscale network you can use the built in DNS, and use the domains they provide. I generally just copy/paste the Tailscale IP from the app though as it's super convenient.

    Oh didnt know this was possible. So, Tailscale gives out domains even on the free plans?

    They're just local addresses that you can use while connected to the Tailscale network, of course. It's like having a LAN but all the devices are scattered over the internet.

    Ah got it. So its not entirely the same. Interesting. I'll have to check it out. Almsot vpn ish

    It's a Wireguard based mesh-vpn system.

    Tailscale is wg based?

    Yes! That's what makes it so dang fast.

    https://tailscale.com/kb/1035/wireguard

    Oh didnt know this. Thanks.

    With as much as I talk it up, you'd almost think I was sponsored, but it really just makes my life so much easier. :p

    Lol. Nothing wrong in praising something without limits that makes your life easier and that you love a lot..we do that for RackNerd every day here.

  • @noob404 said:

    @BlazinDimes said:

    @noob404 said:

    @BlazinDimes said:

    @noob404 said:

    @PuDLeZ said:

    @noob404 said:

    @PuDLeZ said:

    @noob404 said:
    And, can your parents do remote hands if you need to check something physically?

    My dad no, my mom has some knowledge that I can call. Worst case, I do have a pikvm there where I can ask her to connect the hdmi and usb cables so I can further troubleshoot if I can't access the device over the network (do have a site-to-site vpn between my lan and theirs)

    Oh that's actually a great setup you have there. Also for connecting are you using plain old SSH or do you have a VPN as well like Tailscale or something?

    I just use ssh and vnc/rdp as needed. Sometimes I do use the pikvm depending on what actually needs to be done. If I'm at home, I can just target those machines directly. If I'm away from home, I either vpn into my home network (then target them) or I will ssh in and tunnel the required ports.

    Ah ok. I am planning to Tailscale my home connection. Still trying to figure out the specifics of DNS as I have a dynamic IP at home.

    When using the Tailscale network you can use the built in DNS, and use the domains they provide. I generally just copy/paste the Tailscale IP from the app though as it's super convenient.

    Oh didnt know this was possible. So, Tailscale gives out domains even on the free plans?

    They're just local addresses that you can use while connected to the Tailscale network, of course. It's like having a LAN but all the devices are scattered over the internet.

    Oh I see. Ig I got some reading up to understand this in much more detail

    I wonder if this is what some enterprises use. I have heard of a similar setup but maybe its home grown.

  • @BasToTheMax said:

    @noob404 said:
    Okay everyone. I am a zombie at this point. I will see you all tomorrow then. Wdyt?

    Bye. See ya tomorrow

    You as well, dude

  • @MrEd said:

    @noob404 said:
    Okay everyone. I am a zombie at this point. I will see you all tomorrow then. Wdyt?

    Have a good sleep! ;)

    Thank you, Ed. See ya soon

  • @noob404 said:

    @MrEd said:

    @noob404 said:

    @MrEd said:

    @noob404 said:

    @MrEd said:

    @noob404 said:

    @MrEd said:

    @noob404 said:

    @MrEd said:
    I see @dustinc is trying to get back to top10 :D

    Hey Ed, glad you could join ua

    Hi, I should be here for the next half an hour or so :) Trying to make my kids sleep :)

    Ahh okay. Carry on, won't bother you then

    I mean, I will be here for half an hour, and then I will disappear :)

    Oh ok. Good enough for us. Join us in hyping for up

    I hope to be on the lucky page 777 :)

    Want me to tag you in when we are close to 777?

    We are already close to 777 :D

    Oh yah pardon me..I am half-sleepy. I might fall asleep before your kids do :lol:

    I could do for a nap as well! Racknerd has drained my engergy!

  • @noob404 said:
    Okay everyone. I am a zombie at this point. I will see you all tomorrow then. Wdyt?

    Have a good night @noob404

  • @noob404 said:

    @BlazinDimes said:

    @noob404 said:

    @Beniskickbutt said:

    @noob404 said:

    Hey buddy, thanks for joining. Dustins here as well.

    Oh snap! didnt realize that was blazin! Welcome back blazin!

    Blazin's never really gone.

    I'm always around, somewhere. I do a lot of work from home!

    Oh yes. Me as well.

    A very fotunate setup that wasnt so common so many years ago. I dont know how people managed before

Sign In or Register to comment.