Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Quick Links


Shells Virtual Desktop
BMail.ag - Secure Email Service
Server.net
CPLicense.net
VPS Server
Buy VPN
Vultr
VMs for AI
HostDare
ReliableSite White-Label Dedicated Hosting for Resellers
InterServer VPS
BMail.ag - Secure Email Service
Best VPN
High-Performance Bare Metal Server Solutions
Karvl.com
Server Mania Cloud Hosting
DataWagon Hosting
AlphaVPS Hosting
Evoxt.com
Clouvider
VPS Hosting with NVMe
Residential IPs in the US & 4G Mobile Proxies in EU & US with Unlimited Bandwidth
ReliableSite White-Label Dedicated Hosting for Resellers
Rabisu - Hosting Solutions
Shells Virtual Desktop

Categories

In this Discussion

Home › Offers
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

HostBrr | BF Storage Deals - EPYC 10 Gbps Storage VPS - DirectAdmin Storage Boxes 500GB €7/year!

1…2728303233…36

Comments

  • thambyzthambyz Member

    Hello @labze Im using FTP1 and i am unable to use unzip php function, is there any option i need to enable, or is it not supported?
    I tried checking in PHP settings, but there is no option related to PHP extensions

  • cybertechcybertech Member

    anyone unable to mount drive after ftp1 reboot?

    Thanked by 1admax
  • proofofsteakproofofsteak Member

    @labze said:
    FTP1 is being rebooted now to apply another fix to alleviate the issue. It is not someone specifically abusing the system.

    For transparency on this issue: The specific issue happening is that the system journaling aren't keeping up with the data written. The system kernel worker that flushes data and journals basically deadlocks all writes until the journal keeps up. It is such a weird issue I have experienced once before and is quite solvable but just have to adjust the right parameters. It is strange that it is no issue at FTP2 at all, which now sees more usage than FTP1.

    Anyway hope this latest update will permanently resolve it.

    I ran two test transfers about half a day apart, both times the transfers ran smoothly as one would expect from a normally functioning sytem.

    Seems the issue has been resolved, hopefully things remain that way.

    Thanks for the update.

    Thanked by 1bluesega
  • meditatingsurgeonmeditatingsurgeon Member

    @labze said: DE-EPYC-Storage 2 TB

    1 vCore AMD EPYC 9334
    2 GB DDR5 ECC RAM
    30 GB NVMe Boot Storage
    2 TB HDD RAID-6 (NVMe cached)
    20 TB Bandwidth @ 10 Gbps
    €6/month
    €60/year

    I was out of the country and missed this amazing offer @labze - any chance you'll be repeating something like this?

  • Adam1Adam1 Member
    edited December 2024

    @Adam1 said:
    getting permission error writing to ftp2 now... strange, permission changed on fiolder

    this keep recurring, write permission on the folder gets removed - anyone have ideas why thats happening? im just using rclone over ssh.

    for now i've worked around it by resetting the permission on the folder before syncing.

  • plutopluto Member

    Hey @labze why my storagebox with invoice no. 39801 is still pending and I cannot use username and password to login. I have waited since 25/11/2024.

  • xvmxvm Member

    @pluto said:
    Hey @labze why my storagebox with invoice no. 39801 is still pending and I cannot use username and password to login. I have waited since 25/11/2024.

    Just open a ticket.

  • b00nb00n Member

    Is there a way to see LVE limits from the cli? In /proc/cpuinfo I see 32 cpu's which is clearly not what I can use

  • jobayerjobayer Member

    FTP1 transfer speed is too low. I have wasted my money. though its dirt cheap, thus cant complain. You should set a maximum transfer speed (if possible) per account basis during high load. say when high load everyone will get dedicated 20-30 Mbps at least. i'm not evening getting 500KBps. @labze

  • labzelabze Member, Patron Provider

    @jobayer said:
    FTP1 transfer speed is too low. I have wasted my money. though its dirt cheap, thus cant complain. You should set a maximum transfer speed (if possible) per account basis during high load. say when high load everyone will get dedicated 20-30 Mbps at least. i'm not evening getting 500KBps. @labze

    Average network usage over the last 12 hours is around 300 Mbps so plenty of headroom. It is peaking right now so if that is your basis for the results then sure, but if you cannot reach over 500 Kbps then it is likely a peering issue and not due to congestion.

    I don't want to feel like you've wasted money so open a ticket for a refund if you prefer.

  • labzelabze Member, Patron Provider

    @b00n said:
    Is there a way to see LVE limits from the cli? In /proc/cpuinfo I see 32 cpu's which is clearly not what I can use

    You should be able to see this in the resource usage page in DirectAdmin.

  • bluesegabluesega Member
    edited December 2024

    Can't confirm the slow upload speeds, ever since the first fix (not the recent one), uploading from my home connection peaks at its 110mbit/s whereas uploading from other servers in the Frankfurt region is usually around 300-600mbit/s. Constantly available. And after the last fix it's been a pleasure to finally upload everything I wanted to.

  • vr10vr10 Member

    My StorageBox 2TB is working rather well

  • murpfmurpf Member

    @meditatingsurgeon said:

    @labze said: DE-EPYC-Storage 2 TB

    1 vCore AMD EPYC 9334
    2 GB DDR5 ECC RAM
    30 GB NVMe Boot Storage
    2 TB HDD RAID-6 (NVMe cached)
    20 TB Bandwidth @ 10 Gbps
    €6/month
    €60/year

    I was out of the country and missed this amazing offer @labze - any chance you'll be repeating something like this?

    same here :wink:

  • labzelabze Member, Patron Provider

    @murpf said:

    @meditatingsurgeon said:

    @labze said: DE-EPYC-Storage 2 TB

    1 vCore AMD EPYC 9334
    2 GB DDR5 ECC RAM
    30 GB NVMe Boot Storage
    2 TB HDD RAID-6 (NVMe cached)
    20 TB Bandwidth @ 10 Gbps
    €6/month
    €60/year

    I was out of the country and missed this amazing offer @labze - any chance you'll be repeating something like this?

    same here :wink:

    Restock likely happening start of next week.,

    Thanked by 1d0m1234
  • gemini90gemini90 Member

    @labze said:
    Restock likely happening start of next week.

    New node?

  • KebabKebab Member

    @jobayer said:
    FTP1 transfer speed is too low. I have wasted my money. though its dirt cheap, thus cant complain. You should set a maximum transfer speed (if possible) per account basis during high load. say when high load everyone will get dedicated 20-30 Mbps at least. i'm not evening getting 500KBps. @labze

    Try uploading via cloudflare warp

  • hyperblasthyperblast Member
    edited December 2024

    @labze is it possible to combine my StorageBox 500 GB and StorageBox 2 TB into one StorageBox 2.5 TB?

  • d0m1234d0m1234 Member

    also @labze When will there be a restock of the EPYC Storage VPS? :smile:

    Thanked by 1mandala
  • labzelabze Member, Patron Provider

    @d0m1234 said:
    also @labze When will there be a restock of the EPYC Storage VPS? :smile:

    Now

    Thanked by 2mandala d0m1234
  • KebabKebab Member

    @labze ftp1 DA license expired

    Thanked by 1mandala
  • labzelabze Member, Patron Provider

    @Kebab said:
    @labze ftp1 DA license expired

    Fixed.

    Thanked by 1webxeon
  • KhadeercasinoKhadeercasino Member

    I can see BF stock is back again guys grab them asap
    https://my.hostbrr.com/order/main/packages/BF2024/?group_id=62

  • philwatcherphilwatcher Member

    @labze said:

    @Kebab said:
    SHARED & RESELLER WEBHOSTING 9.1 Unless explicitly stated to the contrary our services are intended to be used for the purposes of hosting websites and email. Batch processing, video encoding/transcoding, webcrawling/spidering, archiving, proxies and online backup systems and any system for purposes other than hosting a website are not permitted on our shared or reseller hosting servers. We reserve the right to take proactive action to maintain the stability of our systems for all clients.

    @labze
    are we breaking terms of service if we using this for archiving and online backups?

    This only applies for the normal shared hosting plans. Storageboxes has no limitations on what you can store on it, as long as it abides by remaining TOS. Primarily that it is just legal and non malicious content.

    @labze I would like to use garage (lightweight distributed object storage) to replicate my backups to the Storagebox, but that would mean the garage binary would have to run on the box. I have run a few tests and there are creative ways to get it to work on the Storagebox. Would that be okay under the TOS/AUP? It should not consume many resources, and remain well inside the LVE limits. I just don't want my service to be unexpectedly canceled, and all my other services I have with HostBrr.

  • labzelabze Member, Patron Provider

    @philwatcher said:

    @labze said:

    @Kebab said:
    SHARED & RESELLER WEBHOSTING 9.1 Unless explicitly stated to the contrary our services are intended to be used for the purposes of hosting websites and email. Batch processing, video encoding/transcoding, webcrawling/spidering, archiving, proxies and online backup systems and any system for purposes other than hosting a website are not permitted on our shared or reseller hosting servers. We reserve the right to take proactive action to maintain the stability of our systems for all clients.

    @labze
    are we breaking terms of service if we using this for archiving and online backups?

    This only applies for the normal shared hosting plans. Storageboxes has no limitations on what you can store on it, as long as it abides by remaining TOS. Primarily that it is just legal and non malicious content.

    @labze I would like to use garage (lightweight distributed object storage) to replicate my backups to the Storagebox, but that would mean the garage binary would have to run on the box. I have run a few tests and there are creative ways to get it to work on the Storagebox. Would that be okay under the TOS/AUP? It should not consume many resources, and remain well inside the LVE limits. I just don't want my service to be unexpectedly canceled, and all my other services I have with HostBrr.

    I don't cancel services without prior warning.

    If you can get it to work then I would assume it is fine. However when I do not know the specifics of this workaround then it's hard to be absolute certain.

    Thanked by 1philwatcher
  • labzelabze Member, Patron Provider

    Restocked a few extra EPYC plans.

    Thanked by 3dedicados OsirisBlack Khadeercasino
  • arturitoarturito Member

    @labze DE-EPYC-Storage 1 TB is only 5000Gb Bandwidth now?

  • philwatcherphilwatcher Member
    edited December 2024

    Is it possible to convert my 1TB Storagebox to an EPYC storage server? Like, cancel the one and add the prorated credit towards the EPYC? I kind of just want to forget about my backups and not do creative experiments.

  • philwatcherphilwatcher Member

    @philwatcher said:
    Is it possible to convert my 1TB Storagebox to an EPYC storage server? Like, cancel the one and add the prorated credit towards the EPYC? I kind of just want to forget about my backups and not do creative experiments.

    That would be @labze obviously

  • sanvitsanvit Member

    @philwatcher said:
    Is it possible to convert my 1TB Storagebox to an EPYC storage server? Like, cancel the one and add the prorated credit towards the EPYC? I kind of just want to forget about my backups and not do creative experiments.

    Iirc you are within the money back period. Why not just cancel the old one and purchase the new server?

Sign In or Register to comment.