New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Colocation Needed in Germany
titaniumboy
Member
in General
Hi,
Anyone can provide colocation in germany with these configuration:
1U
400 watt power
BGP Session and IPv4 Address Announcement should be free.
Thank you.
Comments
Check with @PHP_Friends.
Maybe he can help in FRA.
Hi,
in the context of a higher minimum runtime we can offer Announcements (via AS58212) free of charge
I contacted you previously, but your pricing seemed quite costlier. Can you send your offer?
Can do that at 192€ per month, 0,4kW power and BGP Session at 1Gig Uplink included. To be honest, the amount of power you need is the most expensive position, with other DCs it will be way worse.
192€ is quite costly.
I want to host this hardware:
AMD EPYC 7282 16 CORE
256 GB DDR4 ECC RAM
3.84 TB Samsung NVMe
Is 400W ok for this hardware? Or it is more or less?
It will draw much less.
https://www.servethehome.com/amd-epyc-7282-benchmarks-and-review/
Idle Power (Performance Mode): 113W
STH 70% Load: 224W
STH 100% Load: 262W
Maximum Observed Power (Performance Mode): 319W
Is it? I was checking outervision:
https://outervision.com/power-supply-calculator
In outervision, AMD EPYC 7282 CPU wasn't showing so I checked for 7281 and they shown 334 W
The server will be utilised for 24/7 and it will be a virtualization server.
The config is:
1x 813MFTQC-350CB2
1x H12SSL-i
1x AMD EPYC 7282
1x SNK-P0062P
8x 32GB DDR4 ECC Reg 3200MHz
1x Samsung PM9A3 3.84TB M.2 NVMe
1x RSC-RR1U-E16