Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

[1NEXTNET] Canada IPv6 ONLY SSD VPS,Get up to 6 months free

124»

Comments

  • TimboJonesTimboJones Member
    edited January 2023

    @swag said:

    @TimboJones said:
    Line 11 of /etc/network/interfaces is invalid. Fix it and restart.

    Thanks for your advice, here is my content of "/etc/network/interfaces".
    Hope I'm doing it correctly.

    root@can-163:~# paste /etc/network/interfaces

    Include files from /etc/network/interfaces.d:

    source-directory /etc/network/interfaces.d

    Cloud images dynamically generate config fragments for newly

    attached interfaces. See /etc/udev/rules.d/75-cloud-ifupdown.rules

    and /etc/network/cloud-ifupdown-helper. Dynamically generated

    configuration fragments are stored in /run:

    source-directory /run/network/interfaces.d

    auto eno1
    iface eno1 inet6 static
    address 2a12:f8c1:30::
    netmask 64
    gateway 2a12:f8c1:30::1

    up ip addr add 2a12:f8c1:31::4f/64 dev eth0

    Looks like you just need to assign the IPv6 address instead of the 'up' with incorrect eth0...

    Or use a gui network editor like nmtui.

    P.s. use code tags when pasting config files.

  • @TimboJones said:

    @swag said:

    @TimboJones said:
    Line 11 of /etc/network/interfaces is invalid. Fix it and restart.

    Thanks for your advice, here is my content of "/etc/network/interfaces".
    Hope I'm doing it correctly.

    root@can-163:~# paste /etc/network/interfaces

    Include files from /etc/network/interfaces.d:

    source-directory /etc/network/interfaces.d

    Cloud images dynamically generate config fragments for newly

    attached interfaces. See /etc/udev/rules.d/75-cloud-ifupdown.rules

    and /etc/network/cloud-ifupdown-helper. Dynamically generated

    configuration fragments are stored in /run:

    source-directory /run/network/interfaces.d

    auto eno1
    iface eno1 inet6 static
    address 2a12:f8c1:30::
    netmask 64
    gateway 2a12:f8c1:30::1

    up ip addr add 2a12:f8c1:31::4f/64 dev eth0

    Looks like you just need to assign the IPv6 address instead of the 'up' with incorrect eth0...

    Or use a gui network editor like nmtui.

    P.s. use code tags when pasting config files.

    Below is the updated, I'm still not able to get it work :-)

    > root@can-163:~# paste /etc/network/interfaces
    # Include files from /etc/network/interfaces.d:
    source-directory /etc/network/interfaces.d
    
    # Cloud images dynamically generate config fragments for newly
    # attached interfaces. See /etc/udev/rules.d/75-cloud-ifupdown.rules
    # and /etc/network/cloud-ifupdown-helper. Dynamically generated
    # configuration fragments are stored in /run:
    source-directory /run/network/interfaces.d
    
    auto eno1
    iface eno1 inet6 static
    address 2a12:f8c1:31::
    netmask 64
    gateway 2a12:f8c1:31::1
    
    ip addr add 2a12:f8c1:31::4f/64 dev
    
  • @swag said:

    @TimboJones said:

    @swag said:

    @TimboJones said:
    Line 11 of /etc/network/interfaces is invalid. Fix it and restart.

    Thanks for your advice, here is my content of "/etc/network/interfaces".
    Hope I'm doing it correctly.

    root@can-163:~# paste /etc/network/interfaces

    Include files from /etc/network/interfaces.d:

    source-directory /etc/network/interfaces.d

    Cloud images dynamically generate config fragments for newly

    attached interfaces. See /etc/udev/rules.d/75-cloud-ifupdown.rules

    and /etc/network/cloud-ifupdown-helper. Dynamically generated

    configuration fragments are stored in /run:

    source-directory /run/network/interfaces.d

    auto eno1
    iface eno1 inet6 static
    address 2a12:f8c1:30::
    netmask 64
    gateway 2a12:f8c1:30::1

    up ip addr add 2a12:f8c1:31::4f/64 dev eth0

    Looks like you just need to assign the IPv6 address instead of the 'up' with incorrect eth0...

    Or use a gui network editor like nmtui.

    P.s. use code tags when pasting config files.

    Below is the updated, I'm still not able to get it work :-)

    > root@can-163:~# paste /etc/network/interfaces
    # Include files from /etc/network/interfaces.d:
    source-directory /etc/network/interfaces.d
    
    # Cloud images dynamically generate config fragments for newly
    # attached interfaces. See /etc/udev/rules.d/75-cloud-ifupdown.rules
    # and /etc/network/cloud-ifupdown-helper. Dynamically generated
    # configuration fragments are stored in /run:
    source-directory /run/network/interfaces.d
    
    auto eno1
    iface eno1 inet6 static
    address 2a12:f8c1:31::
    netmask 64
    gateway 2a12:f8c1:31::1
    
    ip addr add 2a12:f8c1:31::4f/64 dev
    

    :facepalm:

    Try

    address 2a12:f8c1:31::4f on line 11 and delete the ip addr line completely.

  • Order #1867004576 THANKS :)

  • My email login seems to be restricted by IP rules, can you cancel that function for me. thank you

  • AcimeAcime Member
    edited February 2023

    订单#958921184 THANKS

  • Hey why the coupon code is not working?

  • Plan-A promotional code is unavailable.Please check it.

    Thanked by 1amaalex
  • @FrankRuan said:
    Hey why the coupon code is not working?

    @Ryan_hu said:
    Plan-A promotional code is unavailable.Please check it.

    This one is old.

  • @jwg29859 said:

    @FrankRuan said:
    Hey why the coupon code is not working?

    @Ryan_hu said:
    Plan-A promotional code is unavailable.Please check it.

    This one is old.

    A new one existed or not?

  • Could you offer BGP session for VPS?

  • foudrefoudre Member
    edited February 2023

    Order #1174758353,
    Thanks !

  • My Plan-A test

  • I bought one kanvas vps from 1NEXTNET, but the website shows the vps keeps pending.
    So I created a support ticket for help but no response while 24 hours passed.
    I wonder the 1NEXTNET provider has run away!

  • @windxxx said:
    I bought one kanvas vps from 1NEXTNET, but the website shows the vps keeps pending.
    So I created a support ticket for help but no response while 24 hours passed.
    I wonder the 1NEXTNET provider has run away!

    The staff has replied to me and the machine becomes available now.

  • pypypypy Member

    Is is offer still available?

Sign In or Register to comment.