Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


[1NEXTNET] Canada IPv6 ONLY SSD VPS,Get up to 6 months free
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

[1NEXTNET] Canada IPv6 ONLY SSD VPS,Get up to 6 months free

ChandlerChandler Member, Patron Provider, LIR


1NEXTNET
https://www.1nextnet.com/

Hello everyone, We are a young hosting provider.
We mainly provide IPv6 ONLY VPS, Currently we have our own servers and network in Kansas and Hong Kong.
Today we are going to bring Canada IPv6 ONLY VPS.

Since we have just finished configuring the Canada network, We hope that you can help us test the network and server stability.

Plan-A
CPU 1vCPU(½)
Memory 0.5GB
Storage 10G SSD
Port Speed 100Mbps
H-Bandwidth 1TB
L-Bandwidth ∞(5Mbps)
IP /64 IPv6
$5.99 USD / Annually $4.2 USD / Annually
$1/Setup Fee
Order

Plan-B
CPU 1vCPU
Memory 1GB
Storage 15G SSD
Port Speed 1Gbps
H-Bandwidth 1TB
L-Bandwidth ∞(5Mbps)
IP /64 IPv6
$9.99 USD / Annually$7.0 USD / Annually
$1/Setup Fee
Order

Plan-C
CPU 2vCPU
Memory 2GB
Storage 20G SSD
Port Speed 1Gbps
H-Bandwidth 1TB
L-Bandwidth ∞(5Mbps)
IP /64 IPv6
$14.99 USD / Annually$10.5 USD / Annually
$1/Setup Fee
Order

We have the following 2 coupon codes.
1.L5P9PR0V6CE
Get a free month of PLAN-A, send in your order number and reply to this thread to get an extra month. (If you are from USA or Canada, we will add 1 more month. We want customers in this region to actively use our service.)
After this PLAN-A can be renewed with 20% discount.
2.OA9U67E96
All PLAN get 30% discount, send order number and reply to this thread to get 3 extra months. (If you are from USA or Canada, we will add another 3 months. We want customers in this region to actively use our service.)

*Only one offer per account.
*We refuse Abuse and spam.
*Please fill out the information correctly to pass our anti-fraud system.

About H-Bandwidth and L-Bandwidth

H-Bandwidth means that you can keep the maximum port speed (100Mbps or 1Gbps) when you do not exceed the 1TB preset traffic, and after exceeding the 1TB preset traffic, you have a maximum speed of 5Mbps with unlimited traffic. The preset traffic will resume on the 1st of the month again.

Test IPv6:2a0f:7880:202::1

Contact Us:

Have a question? We’re standing by to take your inquiries! Just reach out via DM, our live chat or via our ticket support at [email protected]

Thanks everyone.

«134

Comments

  • Hello, I believe that the 2 coupon codes should be swaped, is it a typo?

    Also, Plz add one month more for Order #1990864551, thx.

    Thanked by 1Chandler
  • zudazzudaz Member
    edited December 2022

    the 2 coupon codes should be swaped

  • Is there a problem with the discount code?

  • zudazzudaz Member
    edited December 2022

    :)

  • uuc90uuc90 Member
    edited December 2022

    1128828159 thx

    Thanked by 1Chandler
  • Nice offers, improving website design would be a +1, have a look at https://v6node.com/.

    Thanked by 1v3ng
  • order #1637303697 ,thx

    Thanked by 1Chandler
  • Order #1388383949, thx

    Thanked by 1Chandler
  • order #170828395, thanks

    Thanked by 1Chandler
  • alt_alt_ Member
    edited December 2022

    Thanks for sharing the offers.
    The network latency is kind of shaking for me [testing from Rogers], but ok for the price.

    PING6(56=40+8+8 bytes) 2607:fea8:2e21:: --> 2a0f:7880:202::1
    16 bytes from 2a0f:7880:202::1, icmp_seq=0 hlim=57 time=18.891 ms
    16 bytes from 2a0f:7880:202::1, icmp_seq=1 hlim=57 time=14.181 ms
    16 bytes from 2a0f:7880:202::1, icmp_seq=2 hlim=57 time=37.353 ms
    16 bytes from 2a0f:7880:202::1, icmp_seq=3 hlim=57 time=26.438 ms
    16 bytes from 2a0f:7880:202::1, icmp_seq=4 hlim=57 time=34.778 ms
    16 bytes from 2a0f:7880:202::1, icmp_seq=5 hlim=57 time=26.122 ms
    16 bytes from 2a0f:7880:202::1, icmp_seq=6 hlim=57 time=28.222 ms
    16 bytes from 2a0f:7880:202::1, icmp_seq=7 hlim=57 time=32.041 ms
    ^C
    --- 2a0f:7880:202::1 ping6 statistics ---
    8 packets transmitted, 8 packets received, 0.0% packet loss
    round-trip min/avg/max/std-dev = 14.181/27.253/37.353/7.291 ms
    
  • @Chandler thanks for extra 3 months, hope extending to the rest locations soon

    Order #1921927227

    Thanked by 1Chandler
  • Order #1654734495, thanks

    Thanked by 1Chandler
  • Your discount code information is wrong, and my order number: 1287442613

    Thanked by 1Chandler
  • Thanks for your offer of extra 3 months, my order 1903752264

  • aquaaqua Member, Patron Provider

    I believe in the rules it states "No Setup Fee"

  • yoursunnyyoursunny Member, IPv6 Advocate

    @aqua said:
    I believe in the rules it states "No Setup Fee"

    The "no setup fee" rule applies to dedicated server only.
    However, nothing prevents listing a dedicated server as "$129 first month, $109 per month after" instead of "$20 setup fee".

    The rule does not prohibit setup fee on services other than dedicated server.
    Moreover, there's no limit on setup fee either.
    You could totally offer "$1/year VPS with $1000 setup fee".

  • Order #126333446 thank you

    Thanked by 1Chandler
  • aquaaqua Member, Patron Provider

    @yoursunny said:

    @aqua said:
    I believe in the rules it states "No Setup Fee"

    The "no setup fee" rule applies to dedicated server only.
    However, nothing prevents listing a dedicated server as "$129 first month, $109 per month after" instead of "$20 setup fee".

    The rule does not prohibit setup fee on services other than dedicated server.
    Moreover, there's no limit on setup fee either.
    You could totally offer "$1/year VPS with $1000 setup fee".

    Oh ok. Was unaware, didn't want the provider to get in trouble.

  • Order Number is: 1242273253 , THANKS

    Thanked by 1Chandler
  • Order #534490845,thanks!

    Thanked by 1Chandler
  • How do you access via SSH using ipv6?

  • aquaaqua Member, Patron Provider

    @melp57 said:
    How do you access via SSH using ipv6?

    Same way as IPv4?

    Thanked by 1TimboJones
  • BingoBongoBingoBongo Member
    edited December 2022

    @melp57 said:
    How do you access via SSH using ipv6?

    Same as IPv4 but with [ ]

    Example: [2001:4868:4868::8888]

  • Order #537005293,thx. plz 3+3

    Thanked by 1Chandler
  • Order #211676976, thx.

    Thanked by 1Chandler
  • Order #1155173296 thx

    Thanked by 1Chandler
  • Order #1176198583 thx

    Thanked by 1Chandler
  • TimboJonesTimboJones Member
    edited December 2022

    @alt_ said:
    Thanks for sharing the offers.
    The network latency is kind of shaking for me [testing from Rogers], but ok for the price.

    PING6(56=40+8+8 bytes) 2607:fea8:2e21:: --> 2a0f:7880:202::1
    16 bytes from 2a0f:7880:202::1, icmp_seq=0 hlim=57 time=18.891 ms
    16 bytes from 2a0f:7880:202::1, icmp_seq=1 hlim=57 time=14.181 ms
    16 bytes from 2a0f:7880:202::1, icmp_seq=2 hlim=57 time=37.353 ms
    16 bytes from 2a0f:7880:202::1, icmp_seq=3 hlim=57 time=26.438 ms
    16 bytes from 2a0f:7880:202::1, icmp_seq=4 hlim=57 time=34.778 ms
    16 bytes from 2a0f:7880:202::1, icmp_seq=5 hlim=57 time=26.122 ms
    16 bytes from 2a0f:7880:202::1, icmp_seq=6 hlim=57 time=28.222 ms
    16 bytes from 2a0f:7880:202::1, icmp_seq=7 hlim=57 time=32.041 ms
    ^C
    --- 2a0f:7880:202::1 ping6 statistics ---
    8 packets transmitted, 8 packets received, 0.0% packet loss
    round-trip min/avg/max/std-dev = 14.181/27.253/37.353/7.291 ms
    

    You should be using a larger payload for such a test. It'll be higher, but less fluctuating.

  • @melp57 said:
    How do you access via SSH using ipv6?

    Protip: assign the IPv6 to a DNS A Name and just refer to that.

    We would have had IPv6 worldwide 10 years ago if this was taught in schools like it should have been.

    Thanked by 1xms
  • TimboJonesTimboJones Member
    edited December 2022

    Protip 2: say where in Canada this is located. Canada is a large country.

    Edit: I clicked the link, it's Toronto.

Sign In or Register to comment.