New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Comments
Thanks , YABS are here:
Good deals. Have 1 VPS in Singapore and it works efficiently. @Abd What is your service status page? status.natvps.net or status.webhorizon.in?
Can you post bench.monster with network speeds for India? Thanks
Here you go
https://status.webhorizon.in/
Thanks @Abd for offer VPS in Singapore.
Here my test:
Sun Aug 21 07:11:08 EDT 2022
Basic System Information:
Uptime : 0 days, 0 hours, 4 minutes
Processor : Intel(R) Xeon(R) CPU E3-1270 v3 @ 3.50GHz
CPU cores : 1 @ 3499.998 MHz
AES-NI : โ Enabled
VM-x/AMD-V : โ Enabled
RAM : 804.7 MiB
Swap : 256.0 MiB
Disk : 29.2 GiB
Distro : Rocky Linux 8.6 (Green Obsidian)
Kernel : 4.18.0-372.19.1.el8_6.x86_64
fio Disk Speed Tests (Mixed R/W 50/50):
iperf3 Network Speed Tests (IPv4):
Provider | Location (Link) | Send Speed | Recv Speed
| | |
Clouvider | London, UK (10G) | 623 Mbits/sec | 280 Mbits/sec
Online.net | Paris, FR (10G) | 733 Mbits/sec | 298 Mbits/sec
Hybula | The Netherlands (40G) | 794 Mbits/sec | 477 Mbits/sec
Uztelecom | Tashkent, UZ (10G) | 866 Mbits/sec | 307 Mbits/sec
Clouvider | NYC, NY, US (10G) | 681 Mbits/sec | 282 Mbits/sec
Clouvider | Dallas, TX, US (10G) | 686 Mbits/sec | 168 Mbits/sec
[root@kyuc ~]#
iperf3 Network Speed Tests (IPv6):
Provider | Location (Link) | Send Speed | Recv Speed
| | |
Clouvider | London, UK (10G) | 575 Mbits/sec | 18.3 Mbits/sec
Online.net | Paris, FR (10G) | 785 Mbits/sec | 58.7 Mbits/sec
Hybula | The Netherlands (40G) | 617 Mbits/sec | 516 Mbits/sec
Uztelecom | Tashkent, UZ (10G) | busy | 28.5 Mbits/sec
Clouvider | NYC, NY, US (10G) | 545 Mbits/sec | 160 Mbits/sec
Clouvider | Dallas, TX, US (10G) | 748 Mbits/sec | 318 Mbits/sec
Clouvider | Los Angeles, CA, US (10G) | 808 Mbits/sec | 214 Mbits/sec
Geekbench 5 test failed. Run manually to determine cause.
How can I test connection to servers in Asia?
It may be a particular problem of Rocky Linux, now I cannot use vnc from control panel (even port 5961 is open) and backup error too.
Thanks for the benchmark.
May change the vnc password from panel & stop/start the vps once, that should solve it. Or make a ticket
The Singapore plan is sold out now, other Ryzen based plans mentioned in OP are still available
@Abd I have just tried but no luck, made a ticket.
Is this
NL-OUM DSC Cluster 1 or 2
or
PSC Node 1 or 2
?
Not any of those, it's a different setup.
256MB Nat vps can run tailscale software?