All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
KS-LE: Get IPv6 to work under Proxmox
hey guys,
I bought a KS-LE at kimsufis black week offers and installed Proxmox on it using their offered Proxmox distribution but it is not coming with IPv6 connectivity and now I'm stuck getting it to work.
I added the following to my interfaces:
iface vmbr0 inet6 static
address 2001:41d0:****:****::1
netmask 128
post-up sleep 5; /sbin/ip -family inet6 route add 2001:41d0:****:ff:ff:ff:ff:ff dev vmbr0
post-up sleep 5; /sbin/ip -family inet6 route add default via 2001:41d0:****:ff:ff:ff:ff:ff
post-down /sbin/ip -family inet6 route del 2001:41d0:****:ff:ff:ff:ff:ff dev vmbr0
post-down /sbin/ip -family inet6 route del default via 2001:41d0:****:ff:ff:ff:ff:ff
As soon as I reboot the system IPv4 comes back to life but IPv6 does not. SSH is also not working anymore and I have to set it to rescue mode and remove the IPv6 configuration.
Do you have any idea, whats wrong with my config ?
Thanks
Comments
Netmask is /64 and your gw address is wrong too. I just added ipv6 address and gateway, working fine.
I had a netmask of /64 configured but how is my gateway wrong ?
are you ok with me dm you with my IPv6 address ? I don't really know whats wrong with it ?
I changed the netmask back to /64 and I figured out, what you meant with 'gateway is wrong'.
I guess I just messed up with replacing actual IP with stars. I did not fuck it up, it's the LETs post editor It uses STAR STAR text STAR STAR to bold sth
My gateway looks more like this:
post-up /sbin/ip -family inet6 route add 2001:41d0:----:--ff:ff:ff:ff:ff dev vmbr0
post-up /sbin/ip -family inet6 route add default via 2001:41d0:----:--ff:ff:ff:ff:ff
post-down /sbin/ip -family inet6 route del 2001:41d0:----:--ff:ff:ff:ff:ff dev vmbr0
post-down /sbin/ip -family inet6 route del default via 2001:41d0:----:--ff:ff:ff:ff:ff
I can add the IPv6 to an extra VMBR now but I don't get any connectivity to the internet.
Does anyone have an idea ?
DM me please
I had the same issue.
I solved it like this, I installed npd6 and configured it to my subnet.
Then i used the following network config:
And in my VM I used as 2001:41d0:700:xxxx:12:2/64 and as gateway 2001:41d0:700:xxxx::2
The main drawback i'm still having: I need to periodically run a traceroute to keep the IPv6 connection running.
Maybe somebody else can solve it.
Good luck with IPv6 on OVH's network.
Their implementation is so broken and rarely works.
https://wiki.x8e.net/doku.php?id=proxmox_ipv6
Works, besides when they had a maintenance, the entire machine lost connectivity and I need to run a hard reset.