New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Comments
what is your operating system ...
apt-get install nano
nano /etc/ssh/sshd_config
change "Port 22" to the ports you have been provisioned for your LES.
Log in as root and open sshd configuration file with some editor (ie.nano):
nano /etc/ssh/sshd_config
find and change
Port 22
line to your desired port (with lowendspirit this means one of your 10 dedicated ports).And restart the ssh service after change with:
Debian:
/etc/init.d/ssh reload
Centos:
/etc/rc.d/init.d/sshd restart
I think it would be better for you to search http://forum.lowendspirit.com , you will find answer there it was answered more then ones. Here is one example:
To change port for ssh, first connect to your server, easy way is to use console from SolusVM, type:
nano /etc/ssh/sshd_config
change line
Port 22 to what ever port you want (read email for your VM and use one of your 20 ports) then save and exit file, and restart ssh
service ssh restart
You need to use SolusVM console if you don't have IPv6 connectivity, if you have there is not need for solus just connect using your VM's IPv6.
Hope this helps!
I resolved I made a mistake... I always setup the ssh port out of my ports range eheheheh
I also installed squid proxy and all work
thanks to all