New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
how to connecting client windows7 to vpn server using IPSEC/L2TP VPN ??
rakyandita
Member
in Help
i have read tutorial for vpn using openswan in this web : https://raymii.org/s/tutorials/IPSEC_L2TP_vpn_with_Ubuntu_12.04.html
i just follow step by step this configuration. no error found at this log file. but i don't know how to client connect to this server. i was search in other web like http://www.vpngate.net/en/howto_l2tp.aspx#windows , but no solution
anyone help me to fix this problem ??
Comments
what must i fill for this blank ??
from quick glance.... should be the following in the guide
The shared secret is defined in the /etc/ipsec.secrets file. Make sure it is long and random:
%SERVERIP% %any: PSK "69EA16F2C5DCED8B29E74A7D1B0FE99E69F6BDCD3E44"
thanks for reply ...
i was made like that. is shared secret written in the client ?? like my picture above ?
i often get error 789. what that mean ??
@rakyandita assuming the VPN is setup correctly server side, and you just need to connect on Windows, our guide should work for you.
Link: http://vpn.sh/howto-windowsl2tp.html
thanks, i was see your link. then, what mus i fill the "key" form in client side ? is it the key in /etc/shared.secret in server side ?
in tab "security" what must i chose for password authentication protocol ??
@rakyandita assuming you followed Raymii's guide, your shared secret should be here: /etc/ipsec.secrets
Authentication protocols should be able to be left as defaults, just add the pre-shared key within "Advanced Settings". Hope this helps.
Hi
How are you rakyandita?
I think you try this tutorial page. You can get complete features with infographics.
http://www.purevpn.com/tutorials.php
thanks for help
this is work
client get ip based range in /etc/xl2tpd/xl2tpd.conf, but client dosn't get gateway from this server. how about that ???