Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


OneProvider OneCloud 30% off
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

OneProvider OneCloud 30% off

sanvitsanvit Member
edited August 2017 in Providers

Got this mail from OneProvider

We are pleased to offer you a 30% off discount in all of our 32 locations. From today until September 7th, Plan 01 to 05 will be 30% off. This discount is recurring, making sure you will not be paying more in the upcoming month.

Use the Promocode 30AUGUST in order to receive your discount!

Maybe some would find this useful?

Full email can be found here

Thanked by 1caracal

Comments

  • Not sure how I was supposed to know about this beforehand, but after paying I'm unable to create a VM in Sydney

    BECAUSE OF THE WAY OUR ONECLOUD PLANS ARE SPLIT ACROSS DIFFERENT HOST NODES, IT IS CURRENTLY IMPOSSIBLE TO CREATE A VM OF THIS PLAN IN THIS LOCATION. YOU MAY TRY AGAIN LATER. 
  • rm_rm_ IPv6 Advocate, Veteran

    @caracal OF WHICH PLAN?

    It's known that the cheapest plan has no access to some locations, it was reported before about Japan.

    Thanked by 1caracal
  • caracalcaracal Member
    edited August 2017

    That's right, I read about this before.. I sprung for the cheapest plan. That's perhaps why.

    I am able to get setup on the SG node. Hosted by Leaseweb on a E3-1270V2 node.

    rm_ said: cheapest plan has no access to some locations

    ----------------------------------------------------------------------
    CPU model            : Intel(R) Xeon(R) CPU E3-1270 V2 @ 3.50GHz
    Number of cores      : 1
    CPU frequency        : 3492.066 MHz
    Total size of Disk   : 19.2 GB (1.6 GB Used)
    Total amount of Mem  : 488 MB (24 MB Used)
    Total amount of Swap : 1023 MB (0 MB Used)
    System uptime        : 0 days, 0 hour 2 min
    Load average         : 0.07, 0.02, 0.00
    OS                   : Ubuntu 16.04.2 LTS
    Arch                 : x86_64 (64 Bit)
    Kernel               : 4.4.0-79-generic
    ----------------------------------------------------------------------
    I/O speed(1st run)   : 177 MB/s
    I/O speed(2nd run)   : 214 MB/s
    I/O speed(3rd run)   : 232 MB/s
    Average I/O speed    : 207.7 MB/s
    ----------------------------------------------------------------------
    Node Name                       IPv4 address            Download Speed
    CacheFly                        167.88.158.176          17.0MB/s
    Linode, Tokyo, JP               106.187.96.148          19.8MB/s
    Linode, Singapore, SG           139.162.23.4            101MB/s
    Linode, London, UK              176.58.107.39           9.09MB/s
    Linode, Frankfurt, DE           139.162.130.8           9.63MB/s
    Linode, Fremont, CA             50.116.14.9             4.69MB/s
    Softlayer, Dallas, TX           173.192.68.18           5.66MB/s
    Softlayer, Seattle, WA          67.228.112.250          6.10MB/s
    Softlayer, Frankfurt, DE        159.122.69.4            4.41MB/s
    Softlayer, Singapore, SG        119.81.28.170           96.5MB/s
    Softlayer, HongKong, CN         119.81.130.170          36.0MB/s
    ----------------------------------------------------------------------
  • MasonRMasonR Community Contributor

    Doesn't that make it ManyClouds, not OneCloud then?

  • rm_rm_ IPv6 Advocate, Veteran

    @caracal Can you use HK?

  • caracalcaracal Member
    edited August 2017

    @rm_ said:
    @caracal Can you use HK?

    Nope. Unable to create in HK, JP, NZ, AU, Johannesburg so far.

    Edit: I'm happy to run benches in the locations I have access to.

    CH with native IPv6

    ----------------------------------------------------------------------
    CPU model            : Intel(R) Xeon(R) CPU E3-1230 v5 @ 3.40GHz
    Number of cores      : 1
    CPU frequency        : 3407.998 MHz
    Total size of Disk   : 19.2 GB (1.6 GB Used)
    Total amount of Mem  : 488 MB (24 MB Used)
    Total amount of Swap : 1023 MB (0 MB Used)
    System uptime        : 0 days, 0 hour 0 min
    Load average         : 0.07, 0.02, 0.00
    OS                   : Ubuntu 16.04.2 LTS
    Arch                 : x86_64 (64 Bit)
    Kernel               : 4.4.0-79-generic
    ----------------------------------------------------------------------
    I/O speed(1st run)   : 224 MB/s
    I/O speed(2nd run)   : 305 MB/s
    I/O speed(3rd run)   : 346 MB/s
    Average I/O speed    : 291.7 MB/s
    ----------------------------------------------------------------------
    Node Name                       IPv4 address            Download Speed
    CacheFly                        205.234.175.175         100MB/s
    Linode, Tokyo, JP               106.187.96.148          5.92MB/s
    Linode, Singapore, SG           139.162.23.4            6.12MB/s
    Linode, London, UK              176.58.107.39           59.9MB/s
    Linode, Frankfurt, DE           139.162.130.8           16.5MB/s
    Linode, Fremont, CA             50.116.14.9             5.19MB/s
    Softlayer, Dallas, TX           173.192.68.18           9.38MB/s
    Softlayer, Seattle, WA          67.228.112.250          8.08MB/s
    Softlayer, Frankfurt, DE        159.122.69.4            84.5MB/s
    Softlayer, Singapore, SG        119.81.28.170           3.79MB/s
    Softlayer, HongKong, CN         119.81.130.170          4.00MB/s
    ----------------------------------------------------------------------
    Node Name                       IPv6 address            Download Speed
    Linode, Atlanta, GA             2600:3c02::4b           13.4MB/s
    Linode, Dallas, TX              2600:3c00::4b           11.4MB/s
    Linode, Newark, NJ              2600:3c03::4b           15.6MB/s
    Linode, Singapore, SG           2400:8901::4b           9.31MB/s
    Linode, Tokyo, JP               2400:8900::4b           5.83MB/s
    Softlayer, San Jose, CA         2607:f0d0:2601:2a::4    8.24MB/s
    Softlayer, Washington, WA       2607:f0d0:3001:78::2    54.5KB/s
    Softlayer, Paris, FR            2a03:8180:1301:8::4     74.0MB/s
    Softlayer, Singapore, SG        2401:c900:1101:8::2     4.02MB/s
    Softlayer, Tokyo, JP            2401:c900:1001:16::4    5.04MB/s
    ---------------------------------------------------------------------- 
    
    
    Thanked by 1rm_
  • sinsin Member

    Do they have a boot into Rescue option or FreeBSD install?

  • It appears to have both: https://imgur.com/a/6gshA

    Thanked by 1Aidan
  • rm_rm_ IPv6 Advocate, Veteran
    edited August 2017

    @caracal did you find any other locations with native IPv6? I thought it's not supported anywhere. Last time I asked they said they want ALL locations to support IPv6, before rolling it out publicly.

    I'm interested in Sweden and Russia firstly. (can you even access those on the cheap plan?)

  • Does the cheapest plan have access to Brussels, Belgium?

  • SetsuraSetsura Member
    edited August 2017

    @rm_ said:
    I'm interested in Sweden and Russia firstly. (can you even access those on the cheap plan?)

    Russia works, it is with hostkey who are using AS49335. The IP range https://bgp.he.net/net/31.192.111.0/24.

    Also for anyone who wanted Norway, it is Terrahost and pretty good.

  • caracalcaracal Member
    edited August 2017

    @rm_ @magicvpn

    Swedish bench (ping6 failed)

    ----------------------------------------------------------------------
    CPU model            : Intel(R) Xeon(R) CPU E5-2603 v4 @ 1.70GHz
    Number of cores      : 1
    CPU frequency        : 1698.033 MHz
    Total size of Disk   : 19.2 GB (1.6 GB Used)
    Total amount of Mem  : 488 MB (24 MB Used)
    Total amount of Swap : 1023 MB (0 MB Used)
    System uptime        : 0 days, 0 hour 0 min
    Load average         : 0.65, 0.18, 0.06
    OS                   : Ubuntu 16.04.2 LTS
    Arch                 : x86_64 (64 Bit)
    Kernel               : 4.4.0-79-generic
    ----------------------------------------------------------------------
    I/O speed(1st run)   : 57.5 MB/s
    I/O speed(2nd run)   : 58.9 MB/s
    I/O speed(3rd run)   : 104 MB/s
    Average I/O speed    : 73.5 MB/s
    ----------------------------------------------------------------------
    Node Name                       IPv4 address            Download Speed
    CacheFly                        66.225.197.197          42.8MB/s
    Linode, Tokyo, JP               106.187.96.148          5.84MB/s
    Linode, Singapore, SG           139.162.23.4            5.34MB/s
    Linode, London, UK              176.58.107.39           43.4MB/s
    Linode, Frankfurt, DE           139.162.130.8           13.9MB/s
    Linode, Fremont, CA             50.116.14.9             3.60MB/s
    Softlayer, Dallas, TX           173.192.68.18           6.97MB/s
    Softlayer, Seattle, WA          67.228.112.250          7.44MB/s
    Softlayer, Frankfurt, DE        159.122.69.4            7.75MB/s
    Softlayer, Singapore, SG        119.81.28.170           4.08MB/s
    Softlayer, HongKong, CN         119.81.130.170          3.61MB/s
    ----------------------------------------------------------------------
    

    Russian Bench

    Their ubuntu 16.04 image doesn't seem to work http://imgur.com/a/Mg2Cx
    Haven't really got time to troubleshoot or send a ticket. But just be aware.

     
    ----------------------------------------------------------------------
    CPU model            : Intel(R) Xeon(R) CPU E3-1271 v3 @ 3.60GHz
    Number of cores      : 1
    CPU frequency        : 3600.014 MHz
    Total size of Disk   : 19.0 GB (0.9 GB Used)
    Total amount of Mem  : 494 MB (85 MB Used)
    Total amount of Swap : 1023 MB (0 MB Used)
    System uptime        : 0 days, 0 hour 1 min
    Load average         : 0.00, 0.00, 0.00
    OS                   : Debian GNU/Linux 8
    Arch                 : x86_64 (64 Bit)
    Kernel               : 3.16.0-4-amd64
    ----------------------------------------------------------------------
    I/O speed(1st run)   : 471 MB/s
    I/O speed(2nd run)   : 467 MB/s
    I/O speed(3rd run)   : 472 MB/s
    Average I/O speed    : 470.0 MB/s
    ----------------------------------------------------------------------
    Node Name                       IPv4 address            Download Speed
    CacheFly                        95.213.193.68           100MB/s
    Linode, Tokyo, JP               106.187.96.148          7.82MB/s
    Linode, Singapore, SG           139.162.23.4            4.29MB/s
    Linode, London, UK              176.58.107.39           18.4MB/s
    Linode, Frankfurt, DE           139.162.130.8           12.8MB/s
    Linode, Fremont, CA             50.116.14.9             3.95MB/s
    Softlayer, Dallas, TX           173.192.68.18           8.12MB/s
    Softlayer, Seattle, WA          67.228.112.250          7.25MB/s
    Softlayer, Frankfurt, DE        159.122.69.4            32.3MB/s
    Softlayer, Singapore, SG        119.81.28.170           2.70MB/s
    Softlayer, HongKong, CN         119.81.130.170          3.83MB/s
    ----------------------------------------------------------------------
    

    Belgian bench (ping6 failed)

    ----------------------------------------------------------------------
    CPU model            : Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz
    Number of cores      : 1
    CPU frequency        : 3300.022 MHz
    Total size of Disk   : 19.2 GB (1.6 GB Used)
    Total amount of Mem  : 488 MB (24 MB Used)
    Total amount of Swap : 1023 MB (0 MB Used)
    System uptime        : 0 days, 0 hour 1 min
    Load average         : 0.00, 0.00, 0.00
    OS                   : Ubuntu 16.04.2 LTS
    Arch                 : x86_64 (64 Bit)
    Kernel               : 4.4.0-79-generic
    ----------------------------------------------------------------------
    I/O speed(1st run)   : 258 MB/s
    I/O speed(2nd run)   : 256 MB/s
    I/O speed(3rd run)   : 257 MB/s
    Average I/O speed    : 257.0 MB/s
    ----------------------------------------------------------------------
    Node Name                       IPv4 address            Download Speed
    CacheFly                        205.234.175.175         98.0MB/s
    Linode, Tokyo, JP               106.187.96.148          6.16MB/s
    Linode, Singapore, SG           139.162.23.4            8.16MB/s
    Linode, London, UK              176.58.107.39           101MB/s
    Linode, Frankfurt, DE           139.162.130.8           17.3MB/s
    Linode, Fremont, CA             50.116.14.9             5.83MB/s
    Softlayer, Dallas, TX           173.192.68.18           10.6MB/s
    Softlayer, Seattle, WA          67.228.112.250          8.63MB/s
    Softlayer, Frankfurt, DE        159.122.69.4            79.9MB/s
    Softlayer, Singapore, SG        119.81.28.170           3.80MB/s
    Softlayer, HongKong, CN         119.81.130.170          4.26MB/s
    ----------------------------------------------------------------------
    
    Thanked by 1rm_
  • Never again.

    Thanked by 3Nihim layfon Aidan
  • I keep getting "AN ACCESS TOKEN IS REQUIRED TO REQUEST THIS RESOURCE".

  • mikhomikho Member, Host Rep

    Bought one only to find out that they don't do ipv6. :(

Sign In or Register to comment.