New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Adding IPv6 only hosts to Observium
I was trying to add a LES IPV6-only VPS to my Observium installation and received the following error:
/opt/observium/add_device.php LES admin_boxes Observium CE 0.14.11.6000 Add Device(s) Try to add LES: Could not resolve LES. Devices skipped: 1.
However the IP was set up properly in my /etc/host file:
ping6 LES PING LES(LES) 56 data bytes 64 bytes from LES: icmp_seq=1 ttl=56 time=89.5 ms 64 bytes from LES: icmp_seq=2 ttl=56 time=84.1 ms 64 bytes from LES: icmp_seq=3 ttl=56 time=81.7 ms 64 bytes from LES: icmp_seq=4 ttl=56 time=98.4 ms ^C --- LES ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3001ms rtt min/avg/max/mdev = 81.794/88.495/98.462/6.408 ms
Has anyone had success adding an IPv6-only VPS to Observium? I have used com2sec6 for my SNMP agent configuration.
Comments
I was monitoring some IPv6 online devices. Had no problems (but you need a fqdn).
did you use com2sec or com2sec4? And you configured the fqdn at the domain level? (i.e., actually have a real domain/subdomain with an AAAA record?)
My snmpd config:
agentAddress udp6:161
Thats it. I configured a subdomain (zrh-dns-a.xyz.net) with one single AAAA.
Tried to set up an AAAA in Cloudflare (have CF disabled just in case) and added the FQDN in adddevice.php but that didn't seem to work.