New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Comments
does the price still keep as $12/y ?
Ofcourse you will get the annual billing price from the date you change your billing cycle, until then it will be monthly price
just got one 128M, the simple test is here
Thanks for posting the results it should be help a lot of other users
Ordered yet another 128M. Think I'll do some testing amongst those I've got and rate them on similar use..
Thanks
@rectified I think you should check the disk, since with more users come in, seems the I/O is terrible now
even HDD shouldn't be so slow
Hi we are checking it, will update shortly
Please check now, it's getting better again, the problem was there was big order of multiple VPS so multiple templates disk were being resized etc... which caused it
[root@vps1 ioping-0.9]# !dd
dd if=/dev/zero of=/tmp/test1.img bs=1G count=1 oflag=dsync
1+0 records in
1+0 records out
1073741824 bytes (1.1 GB) copied, 22.6754 s, 47.4 MB/s
[root@vps1 ioping-0.9]# dd if=/dev/zero of=test bs=64k count=4k conv=fdatasync
4096+0 records in
4096+0 records out
268435456 bytes (268 MB) copied, 1.78404 s, 150 MB/s
[root@vps1 ioping-0.9]#
It's getting better again:
[root@vps1 ~]# !dd
dd if=/dev/zero of=test bs=64k count=4k conv=fdatasync
4096+0 records in
4096+0 records out
268435456 bytes (268 MB) copied, 1.4823 s, 181 MB/s
[root@vps1 ~]#
Yes it will keep changing every few seconds depending upon I/O use by all the VPS on the server, currently there is no lag or any problems with the VPS:
[root@vps1 ~]# dd if=/dev/zero of=test bs=64k count=4k conv=fdatasync
4096+0 records in
4096+0 records out
268435456 bytes (268 MB) copied, 1.71114 s, 157 MB/s
[root@vps1 ~]#
Do you have FreeBSD OS?
Hi
Just sign up with CentOS OS then you can install FreeBSD from ISO available under your VPS Control Panel or if you want we can install it for you, you just need to submit a ticket from our website for it
@hotsnow Please check now, we tweaked the SSD RAID a bit and now performance has increased many times more
[root@vps1 ~]# !dd
dd if=/dev/zero of=test bs=64k count=4k conv=fdatasync
4096+0 records in
4096+0 records out
268435456 bytes (268 MB) copied, 0.919959 s, 292 MB/s
[root@vps1 ~]# dd if=/dev/zero of=test bs=64k count=4k conv=fdatasync
4096+0 records in
4096+0 records out
268435456 bytes (268 MB) copied, 0.991412 s, 271 MB/s
[root@vps1 ~]# dd if=/dev/zero of=test bs=64k count=4k conv=fdatasync
4096+0 records in
4096+0 records out
268435456 bytes (268 MB) copied, 1.05791 s, 254 MB/s
[root@vps1 ~]# dd if=/dev/zero of=test bs=64k count=4k conv=fdatasync
4096+0 records in
4096+0 records out
268435456 bytes (268 MB) copied, 0.893861 s, 300 MB/s
[root@vps1 ~]#
seems still not so normal as SSD
So far, I'm happy with my low end host with these guys. They setup my ISO and access rather quickly, and although the SSD has been a bit on the slow side (did a cvsup ports, sys-src, and took almost an hour to delete afterwards), the machine itself is quite usable.
Thank you
1 more question , if i buy, can i request more IPv6?
How many IPv6 do you need ? if you need 3-4 additional IPv6 we can give it for free, but if you need more let us know how many?
Thanks
@WSS @hotsnow and everybody else having Disk I/O issue please reboot your VPS from the VPS Control Panel then check it again, it should be much better now, it was a Guest Disk Cache Issue which is now fixed, but this setting won't come effect till the VM/VPS is rebooted
Thanks
10 ??
No problem, will give it for free, jus submit a ticket once you have ordered your VPS
@rectified seems no any effect, rebooted both from panel and vps, even worse now.
Temporarily we have stopped accepting orders for Trial Package, we will start accepting orders again most likely next week, waiting for our new VPS Node to be ready, though we will continue to accept orders for all other packages
@rectified I'm not sure if it's better. You graciously let me load OpenBSD on mine, which by default reorders entry points in libraries for extra security. It took so long to come back that I ended up loading VNC to make sure it didn't break. I don't usually do that for machines that have no load.
@rectified Much speedier so far, at least for writes. Added another host. Thanks!
Thanks, moreover we are working on a permanent fix, but it will take a few days, we are adding a new node, then we will move some VPS on the new node (there won't be any downtime as the new node will be also on same network and same facility, even IP will remain same) then we need to reconfigure RAID on this node for a permanent fix, but there will be hardly any downtime, and if there will be any downtime we will update all affected clients
We expect it all to be done latest by end of next week
Can you give a heads' up when you've got more goodies?
I'm still having problems receiving your messages to gmail, and now since Satish graciously bound my accounts, I can't login since I did a password reset on the old one. 
Hi you may order more VPS if you want, looks like our last tweak worked, we are constantly monitoring the server and Disk I/O doesn't to goes under 90 MB/s anymore, mostly between 100-200 MB/s, though we are working on making it go over 300 MB/s hopefully once we get our new node and reconfigure RAID, it should take it over 300MB/s
Also I've reset your billing password again, kindly check your email including junk mail/spam folder
Awesome. Thank you!