Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


IPv6 with Proxmox
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

IPv6 with Proxmox

ZiggaZigga Member
edited October 2012 in Help

TL:DR I have a $35 dedi from Datashack. Trying to figure out how to get IPv6 working.

Currently I am using proxmox in routed mode? (Whatever it ships in default)

My /etc/network/interfaces(on the node) looks like this:

auto lo
iface lo inet loopback

auto vmbr0
iface vmbr0 inet static
        address 199.168.102.XX
        netmask 255.255.255.248
        gateway 199.168.102.XX
        bridge_ports eth0
        bridge_stp off
        bridge_fd 0
iface vmbr0 inet6 static
        address 2604:4300:Censored:36:0:0:0:0002
        netmask 64
        gateway 2604:4300:Censored:36:0:0:0:0001
        bridge_ports eth0
        bridge_stp off
        bridge_fd 0

Currently, I am getting a lot of:
root@server:/# ping6 ipv6.google.com
PING ipv6.google.com(da-in-x63.1e100.net) 56 data bytes
From 2604:4300:Censored:36::2 icmp_seq=2 Destination unreachable: Address unreachable

Anyone have any ideas? I know several of you lovely folk own similar boxes from Datashack, have you got IPv6 working?

-(I'll probably be opening a series of these "Proxmox: help me, I suck threads." I promise to write a lovely howto based on my notes very soon.)-

Comments

  • If you do a traceroute6 ipv6.google.com do you get to your default gateway or even passed it?

  • I just enable v6 on the HN, Then configure it in the interfaces conf file.. But I have never used proxmox before so I assume yours differs.

  • ZiggaZigga Member
    edited October 2012

    @dirk said: If you do a traceroute6 ipv6.google.com do you get to your default gateway or even passed it?

    No, it never hits the router. I can just see my own IP

    traceroute to ipv6.google.com (2607:f8b0:400f:801::1011), 30 hops max, 80 byte packets
     1  2604:4300:Censored:36::2 (2604:4300:a:36::2)  3000.466 ms !H  3000.457 ms !H  3000.451 ms !H
    

    @Jacob, am I missing anything in my configuration? I am not sure I need the STP and FD bit to be honest.

Sign In or Register to comment.