New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Hetzner AX42, 8700GE, 64GB DDR5 ECC, 2x512GB nvme
root@AX42 ~ # smartctl -x /dev/nvme0
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-18-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: SAMSUNG MZVL2512HCJQ-00B00
Serial Number: S675NF0WC52926
Firmware Version: GXA7801Q
PCI Vendor/Subsystem ID: 0x144d
IEEE OUI Identifier: 0x002538
Total NVM Capacity: 512,110,190,592 [512 GB]
Unallocated NVM Capacity: 0
Controller ID: 6
NVMe Version: 1.3
Number of Namespaces: 1
Namespace 1 Size/Capacity: 512,110,190,592 [512 GB]
Namespace 1 Utilization: 6,944,419,840 [6.94 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 002538 bc31b7b506
Local Time is: Wed Apr 17 14:02:15 2024 CEST
Firmware Updates (0x16): 3 Slots, no Reset required
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x0057): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Timestmp
Log Page Attributes (0x0e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg
Maximum Data Transfer Size: 128 Pages
Warning Comp. Temp. Threshold: 81 Celsius
Critical Comp. Temp. Threshold: 85 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 8.37W - - 0 0 0 0 0 0
1 + 8.37W - - 1 1 1 1 0 200
2 + 8.37W - - 2 2 2 2 0 200
3 - 0.0500W - - 3 3 3 3 2000 1200
4 - 0.0050W - - 4 4 4 4 500 9500
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 39 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 0%
Data Units Read: 674,042 [345 GB]
Data Units Written: 521,459 [266 GB]
Host Read Commands: 82,957,842
Host Write Commands: 62,308,756
Controller Busy Time: 10
Power Cycles: 4
Power On Hours: 1
Unsafe Shutdowns: 0
Media and Data Integrity Errors: 0
Error Information Log Entries: 0
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 1: 39 Celsius
Temperature Sensor 2: 62 Celsius
Error Information (NVMe Log 0x01, 16 of 64 entries)
No Errors Logged
root@AX42 ~ # smartctl -x /dev/nvme1
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-18-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: SAMSUNG MZVL2512HCJQ-00B00
Serial Number: S675NF0WC52934
Firmware Version: GXA7801Q
PCI Vendor/Subsystem ID: 0x144d
IEEE OUI Identifier: 0x002538
Total NVM Capacity: 512,110,190,592 [512 GB]
Unallocated NVM Capacity: 0
Controller ID: 6
NVMe Version: 1.3
Number of Namespaces: 1
Namespace 1 Size/Capacity: 512,110,190,592 [512 GB]
Namespace 1 Utilization: 8,006,320,128 [8.00 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 002538 bc31b7b518
Local Time is: Wed Apr 17 14:02:15 2024 CEST
Firmware Updates (0x16): 3 Slots, no Reset required
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x0057): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Timestmp
Log Page Attributes (0x0e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg
Maximum Data Transfer Size: 128 Pages
Warning Comp. Temp. Threshold: 81 Celsius
Critical Comp. Temp. Threshold: 85 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 8.37W - - 0 0 0 0 0 0
1 + 8.37W - - 1 1 1 1 0 200
2 + 8.37W - - 2 2 2 2 0 200
3 - 0.0500W - - 3 3 3 3 2000 1200
4 - 0.0050W - - 4 4 4 4 500 9500
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 39 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 0%
Data Units Read: 670,218 [343 GB]
Data Units Written: 526,665 [269 GB]
Host Read Commands: 82,818,536
Host Write Commands: 62,647,643
Controller Busy Time: 10
Power Cycles: 4
Power On Hours: 1
Unsafe Shutdowns: 0
Media and Data Integrity Errors: 0
Error Information Log Entries: 0
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 1: 39 Celsius
Temperature Sensor 2: 63 Celsius
Error Information (NVMe Log 0x01, 16 of 64 entries)
No Errors Logged
root@AX42 ~ # wget -qO- yabs.sh | bash
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
# Yet-Another-Bench-Script #
# v2024-03-05 #
# https://github.com/masonr/yet-another-bench-script #
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
Wed Apr 17 02:02:33 PM CEST 2024
Basic System Information:
---------------------------------
Uptime : 0 days, 0 hours, 1 minutes
Processor : AMD Ryzen 7 PRO 8700GE w/ Radeon 780M Graphics
CPU cores : 16 @ 3059.954 MHz
AES-NI : ✔ Enabled
VM-x/AMD-V : ✔ Enabled
RAM : 60.5 GiB
Swap : 0.0 KiB
Disk : 936.3 GiB
Distro : Debian GNU/Linux 12 (bookworm)
Kernel : 6.1.0-18-amd64
VM Type : NONE
IPv4/IPv6 : ✔ Online / ✔ Online
IPv6 Network Information:
---------------------------------
ISP : Hetzner Online GmbH
ASN : AS24940 Hetzner Online GmbH
Host : Hetzner
Location : Ehingen, Baden-Wurttemberg (BW)
Country : Germany
fio Disk Speed Tests (Mixed R/W 50/50) (Partition /dev/md2):
---------------------------------
Block Size | 4k (IOPS) | 64k (IOPS)
------ | --- ---- | ---- ----
Read | 1.29 GB/s (324.0k) | 2.71 GB/s (42.4k)
Write | 1.29 GB/s (324.8k) | 2.73 GB/s (42.7k)
Total | 2.59 GB/s (648.8k) | 5.45 GB/s (85.2k)
| |
Block Size | 512k (IOPS) | 1m (IOPS)
------ | --- ---- | ---- ----
Read | 3.56 GB/s (6.9k) | 3.88 GB/s (3.7k)
Write | 3.75 GB/s (7.3k) | 4.14 GB/s (4.0k)
Total | 7.31 GB/s (14.2k) | 8.03 GB/s (7.8k)
iperf3 Network Speed Tests (IPv4):
---------------------------------
Provider | Location (Link) | Send Speed | Recv Speed | Ping
----- | ----- | ---- | ---- | ----
Clouvider | London, UK (10G) | 927 Mbits/sec | 932 Mbits/sec | 23.9 ms
Eranium | Amsterdam, NL (10G) | 929 Mbits/sec | 936 Mbits/sec | 10.9 ms
Telia | Helsinki, FI (10G) | busy | busy | 35.1 ms
Uztelecom | Tashkent, UZ (10G) | 883 Mbits/sec | 447 Mbits/sec | 89.4 ms
Leaseweb | Singapore, SG (10G) | 800 Mbits/sec | 567 Mbits/sec | 174 ms
Clouvider | Los Angeles, CA, US (10G) | 815 Mbits/sec | 472 Mbits/sec | 150 ms
Leaseweb | NYC, NY, US (10G) | 864 Mbits/sec | 668 Mbits/sec | 97.4 ms
Edgoo | Sao Paulo, BR (1G) | 815 Mbits/sec | 180 Mbits/sec | 154 ms
iperf3 Network Speed Tests (IPv6):
---------------------------------
Provider | Location (Link) | Send Speed | Recv Speed | Ping
----- | ----- | ---- | ---- | ----
Clouvider | London, UK (10G) | 915 Mbits/sec | 915 Mbits/sec | 23.7 ms
Eranium | Amsterdam, NL (10G) | 922 Mbits/sec | 921 Mbits/sec | 10.8 ms
Uztelecom | Tashkent, UZ (10G) | 874 Mbits/sec | 497 Mbits/sec | 89.7 ms
Leaseweb | Singapore, SG (10G) | busy | 610 Mbits/sec | 174 ms
Clouvider | Los Angeles, CA, US (10G) | 805 Mbits/sec | 637 Mbits/sec | 150 ms
Leaseweb | NYC, NY, US (10G) | 853 Mbits/sec | 616 Mbits/sec | 97.3 ms
Edgoo | Sao Paulo, BR (1G) | 798 Mbits/sec | 234 Mbits/sec | 154 ms
Geekbench 6 Benchmark Test:
---------------------------------
Test | Value
|
Single Core | 2868
Multi Core | 13274
Full Test | https://browser.geekbench.com/v6/cpu/5753119
YABS completed in 12 min 20 sec
HEL1 (Helsinki)
(€ 44.30 max. per month / € 0.0710 per hour + € 39.00 once-off setup)
FSN1 (Falkenstein)
(€ 47.30 max. per month / € 0.0758 per hour + € 39.00 once-off setup)
Order URL：
https://robot.hetzner.com/order/server/product/1611/category/rootserver
Comments
It is not listed on the website it self ...
Looks sweaty, to bad setup cost, will wait till they cancel that.
Not listed under the "AX-LINE" page, but seems to be listed if you use the "Server finder" instead, for example: https://www.hetzner.com/dedicated-rootserver/#cpu_type=AMD&drive_type=nvme&freq_from=3.4&location=FSN
Interested to see lshw and/or dmidecode results
https://pastebin.com/Dka9QV3S
Hope it helps.
If I had verification on the Hetzner account, it would be better if the server took it from the auction
Laptop silicon now in server hardware interesting
https://www.hetzner.com/dedicated-rootserver/ax42/configurator/#/
Official website update: AX42 officially replaces AX41 and is now on sale!
I'll wait for a free setup promo
Same here, just wait a bit don't spend money on setup
It's a desktop CPU
well, it is a desktop overall, but that single core score... hmmm.... nice
Single Core | 2868
And Radeon 780 iGPU
For a 35W TDP part I think it's quite impressive, and AFAIK a 7950X gets 3100~ single core. Tho it has only 16MB L3 cache and a low amount of PCI-E lanes for a desktop. Also the iGPU is quite impressive itself.
Phoenix is originally laptop silicon, ported to desktop. Raphael were the first Zen 4 dekstop chips.
It is a laptop CPU re-branded as a desktop CPU, but it is monolithic instead of chiplet which is better for performance compared to the Ryzen 7000 desktop series.
Zen 4 itself is very efficient and monolithic makes it even better, but AMD set the power limit of their desktop CPUs too high for the sake of benchmarks. You can turn on Eco mode and won't lose much performance.
...