New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Comments
Is manchester the only location?
My VPS server is seriously overloaded and is waiting to be replaced
yes, agree, problem with support. on weekends do not reply at all.
What's the point of 10Gbps if the majority of connections are being routed through your 1Gbps IX ports?
Yes
This will be rectified soon, we're upgrading our network and adding support for 10Gbps on our dedicated servers.
Tested not bad, keep it.
What's going on? The performance of this server is so poor that the test cannot be completed. Can you give me a NVME server that meets the standards? I cannot accept this server.
## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
Yet-Another-Bench-Script
v2023-09-06
https://github.com/masonr/yet-another-bench-script
## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
Sat Oct 7 19:21:24 HKT 2023
Basic System Information:
Uptime : 1 days, 17 hours, 28 minutes
Processor : Intel Core Processor (Broadwell, IBRS)
CPU cores : 1 @ 2199.996 MHz
AES-NI : Enabled
VM-x/AMD-V : Enabled
RAM : 1.9 GiB
Swap : 2.0 GiB
Disk : 14.4 GiB
Distro : Ubuntu 23.04
Kernel : 6.5.5-x64v3-xanmod1
VM Type : KVM
IPv4/IPv6 : Online / Online
Fio binary download failed. Running dd test as fallback....
dd Sequential Disk Speed Tests:
Write | 31.8 MB/s | 32.3 MB/s | 34.3 MB/s | 32.80 MB/s
Read | 121 MB/s | 119 MB/s | 114 MB/s | 118.00 MB/s
iperf3 binary download failed. Skipping iperf network tests...
Running GB6 benchmark test... cue elevator music
i dropped all vps here due to performance
Your VPS has been moved to a premium node. As per the ticket reply, we’ve had an influx abusive orders, we are working through these issues.
Yeah, yes, I have just switched to a usable server. But the network bandwidth still seems to be insufficient. It should be classified according to user usage and behavior.
should give me some progress notification so I know what's going on.Wish you all the best
CPU Model : AMD EPYC-Rome Processor
CPU Cores : 1 @ 3693.060 MHz
CPU Cache : 512 KB
AES-NI : Enabled
VM-x/AMD-V : Disabled
Total Disk : 14.5 GB (7.0 GB Used)
Total Mem : 1.9 GB (1.3 GB Used)
Total Swap : 2.0 GB (0 Used)
System uptime : 0 days, 8 hour 17 min
Load average : 1.25, 1.52, 1.46
OS : Ubuntu 23.04
Arch : x86_64 (64 Bit)
Kernel : 6.5.5-x64v3-xanmod1
TCP CC : bbr
Virtualization : KVM
IPv4/IPv6 : Online / Online
Organization : AS48605 27Fibre Ltd
Location : Manchester / GB
Region : England
I/O Speed(1st run) : 1.2 GB/s
I/O Speed(2nd run) : 1.3 GB/s
I/O Speed(3rd run) : 1.3 GB/s
I/O Speed(average) : 1297.1 MB/s
Node Name Upload Speed Download Speed Latency
Speedtest.net 840.60 Mbps 6622.73 Mbps 1.99 ms
Los Angeles, US 455.53 Mbps 288.18 Mbps 135.38 ms
Dallas, US 338.26 Mbps 332.13 Mbps 107.96 ms
Montreal, CA 483.16 Mbps 804.25 Mbps 80.06 ms
Paris, FR 633.25 Mbps 822.59 Mbps 13.33 ms
Amsterdam, NL 979.68 Mbps 1981.16 Mbps 12.10 ms
Shanghai, CN 147.66 Mbps 1453.21 Mbps 239.49 ms
Hongkong, CN 249.06 Mbps 708.74 Mbps 207.73 ms
Singapore, SG 419.02 Mbps 308.76 Mbps 161.76 ms
Tokyo, JP 271.28 Mbps 395.14 Mbps 211.98 ms
Finished in : 5 min 49 sec
Timestamp : 2023-10-08 04:16:52 HKT