New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Hetzner EX101 with 10gig link for transfer
itsgoingdown
Member
Links for reference
https://www.hetzner.com/dedicated-rootserver/ex101
https://docs.hetzner.com/robot/dedicated-server/network/10g-uplink/
Cost - At least want to recoup the set up fees of 40 EUR.
Will be transferred after 10th, since hetzner doesn't allow transfers before 30 days.
Comments
Whats the total renewal cost?
I'm guessing 84 + 42.90 = 126.90 euro pre tax?
This is in FSN(Germany) . So 87+42.9.
Can provide yabs if any intrest.
You are free to get the add on removed if you don't value 10 gig uplink.
Pls post yabs. I'm interested what can Hetzner peering on 10 Gbps.
```# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
Yet-Another-Bench-Script
v2023-04-23
https://github.com/masonr/yet-another-bench-script
## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
Sat Jun 3 08:20:04 PM UTC 2023
Basic System Information:
Uptime : 21 days, 22 hours, 34 minutes
Processor : 13th Gen Intel(R) Core(TM) i9-13900
CPU cores : 32 @ 2000.000 MHz
AES-NI : ✔ Enabled
VM-x/AMD-V : ✔ Enabled
RAM : 62.5 GiB
Swap : 0.0 KiB
Disk : 3.5 TiB
Distro : Debian GNU/Linux 12 (bookworm)
Kernel : 6.1.0-9-amd64
VM Type : NONE
IPv4/IPv6 : ✔ Online / ✔ Online
IPv6 Network Information:
ISP : Hetzner Online GmbH
ASN : AS24940 Hetzner Online GmbH
Location : Falkenstein, Saxony (SN)
Country : Germany
fio Disk Speed Tests (Mixed R/W 50/50):
iperf3 Network Speed Tests (IPv4):
iperf3 Network Speed Tests (IPv6):
Geekbench 6 Benchmark Test:
Test | Value
|
Single Core | 2831
Multi Core | 16912
Full Test | https://browser.geekbench.com/v6/cpu/1471846
YABS completed in 9 min 51 sec```
Attached
Is bandwidth limited to 20TB per month?
Hetzner gives following information: "Please note that our unlimited traffic policy does not apply to servers that have the 10G uplink addon. In this special case, we will charge the usage over 20TB with € 1.00/TB. (The basis for calculation is for outgoing traffic only. Incoming and internal traffic is not calculated.) There is no bandwidth limitation."
https://docs.hetzner.com/robot/dedicated-server/network/10g-uplink
In the price 20 TB of outgoing is included. Every second TB will cost 1 EUR + VAT.
I'd do free transfer if that helps any one looking for this.
yes please!
I did do one above, scroll pls
Mods, please close this. Its gone.
Holy. How is it gone?