New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
The most popular KVM servers in Romania on LET
FlorinMarian
Member, Host Rep
in Offers
Hello, darling!
If you are looking for VPS servers with AntiDDoS Voxility or OVH Game protection, with enough hardware resources without overselling that can be paid for with cryptocurrencies, thus preserving your identity, you are in the right place.
What's new this time?
- We no longer have packages that annually cost the equivalent of a coffee at a gas station (We do not miss the abuses)
- All VPS servers have a dedicated physical Thread for each vCPU
- A new profile picture from the holiday in Bulgaria
Without further ado, these are our currently available offers:
2vCPU - 4GB RAM - 120GB SSD Enterprise
- Location: Romania
- Starting from €7.49 Euro Monthly (Configurable)
- CPU E5-2699 V3
- CPU Speed 2.30GHz ↗ 3.60GHz
- Memory DDR4 ECC 2133MHz
- Storage SSD Samsung PM893 Enterprise
- Network 1Gbps (Shared)
- AntiDDoS Voxility 1Tbps
- Order it here
2vCPU - 4GB RAM - 500GB SATA RAID10 Enterprise
- Location: Romania
- Starting from €7.49 Euro Monthly (Configurable)
- CPU E5-2698 V3
- CPU Speed 2.30GHz ↗ 3.60GHz
- Memory DDR4 ECC 2133MHz
- Storage SATA 7200RPM Enterprise
- Network 1Gbps (shared)
- AntiDDoS Voxility 1Tbps
- Order it here
2vCPU - 4GB RAM - 40GB SSD NVMe Enterprise
- Location: Germany
- Starting from €9.99 Euro Monthly (Configurable)
- CPU AMD Ryzen 7 3800X
- CPU Speed 3.90GHz ↗ 4.50GHz
- Memory DDR4 2666MHz
- Storage SSD NVMe SAMSUNG PM983 Enterprise
- Network 1Gbps (Shared)
- AntiDDoS OVH Game
- Order it here
Included With Every Plan
- Integrated Control Panel
- KVM Virtualization
- Root Access
- Free Technical Support
- Custom ISO accepted
- 1-Click Reinstall
Operating Systems:
- CentOS 7 64bits
- CentOS 8 64bits
- CentOS 9 64bits
- Debian 9 64bits
- Debian 10 64bits
- Debian 11 64bits
- Ubuntu 18.04 64bits
- Ubuntu 20.04 64bits
- Ubuntu 22.04 64bits
- FreeBSD 12.x 32bits
- FreeBSD 12.x 64bits
- FreeBSD 13.x 32bits
- FreeBSD 13.x 64bits
Useful information:
- Looking Glass: Click here
- Terms & Conditions: Click here
- Accetable Usage Policy: Click here
- Privacy Policy: Click here
Accepted payment methods:
- MobilPay (Visa / Maestro / Mastercard)
- Paysafecard
- Bitcoin
- Ethereum
- USD Coin
- Dogecoin
- Litecoin
- Dai
- Bitcoin Cash
- Bank Transfer
Thanked by 1miu
Comments
That must be massive improvement on your vps
Yes, since another provider in Romania had wooden racks, we thought of testing an underwater rack prototype.
And not only this.. Also (i assume) you are probably most frequently profile photo changing provider on LET!
So:
We are looking fwd for Autumn and then Winter photos
In every case, good sale i wish (seems, you growing in these difficult times = praiseworthy, good work)
And can you post yabs of SATA500 plan pls? thanks
Hi @FlorinMarian ! Congrats and good luck! 👍
If i put pictures of me topless wearing assless chaps, someone will finally recognize me?
Sorry for being late.
GB5 score is quite low but it's caused by that we don't run 24/24 with vCPUs in Performance Mode but in Power Save at least 2 more months when tens of VMs will leave our node.
Best regards, Florin.
I guess this VPS is running on PVE node (according to high VM disk I/O => thanks to ZFS R10 caching utilizing of RAM).
May i ask what number do you have set for this VM in "CPU Units"? ~300-400?
From my experiences CPU scaling governor set in powersafe mode does not very affect peak performance in high load situations: When server is idling (load low), then this mode cause that CPU clock is strictly decreased down and saving power by this way. But: When high CPU load come (for example when GB5 begin), then nowadays CPUs very fast raise / switch their clock to max and give nearly performance as in permanent performance mode do (when governor is set in performance mode and CPU keep high clocking whole time mandatory, when i good remember, i measured difference in performance around only ~3-5% between these two mentioned cpu modes). So i assume that low GB5 score (for E5-2698 i would be expecting something ~650-700 per thread) is caused that you hard limit its CPU threads in hypervisor, not by fact that host/node OS is running in powersafe CPU governor mode
All our VMs have priority 1024, so there are no differences between them.
I would like to prove you right, but practice won't let me.
Look, just by switching from "powersave" -> "ondemand" the score increased by 41%. We will not switch to Performance mode at the moment because it would double the energy consumption (already very high because the server is 1U, with 16 drives: 12x 3.5" + 4x 2.5") and has coolers that run permanently at over 10,000 rpm.
My brother is always right, even if it doesn't work to my advantage all the time
Should a hypervisor be ran on anything BUT performance mode? I know ESXi documentation says to disable power save functionality.
I mean, a score of 377 is hot garbage.
Lastly, threads are not equal, so I wouldn't expect equivalent performance across threads, especially with powersave features enabled.
Multi Core | 525
finally! a worthy opponent for the KS-1
Where were you in Bulgaria on holiday? Just curious.
Golden Sands
Since we gave up the location in France, we have for rent our old dedicated server which is a GAME-3, with 16 failover IP addresses included and 1Gbps Inbound/Outbound bandwidth even if the theoretical server should only have 250Mbps.
We offer access for server management directly from our WHMCS interface and you have the great advantage that you can also pay with cryptocurrencies for this server.
The asking price is 60 euros/month.
Not even close, costs more than a KS-1 with 1/4 the disk.
KS-1 also has 500GB (2TB only if you are lucky), the bandwidth is 10 times lower than with us, you cannot have additional IPv4 addresses while we offer up to 16 IP addresses, we do not charge the installation (10 euros + VAT if I'm not mistaken) and if you add VAT to the calculation, the difference is only 1.5 euros/month.
Also, I don't think there's any point in talking about technical support at Kimsufi
ks1 has 1tb normally, 2tb if you are lucky
I don't know why, but I had the impression that it was 500GB and it was not available on the website to check this information.
Thanks for the correction
That changed several years ago. The KS-1 is also only €5.99 per month and setup is €5.99, so the price of yours is the same as KS-1 after 3 months.
There is no comparison to the KS-1 because the KS-1 is a mythical unicorn that can never actually be ordered.
Gravelines are in stock right now.
this unicorn came too soon.
Down for Maintenance (Err 3)
Proof of improvement:
What was the problem and how did you resolve it?
At the beginning of July, I played a little through the BIOS and incorrectly adjusted the configurable parameters of the CPU in the performance/energy consumption ratio. With the settings I had, I had created a bottleneck that led to an energy consumption of 500W in a simple benchmark with YABS without the temperature rising too much.
I realized the problem by following the current consumption during a YABS and I was very surprised to see that from 400W it suddenly dropped to 10W several times under the conditions that normally it would not consume below 250W at all.
Server number 4 had a small reboot to activate the tunnel through Route48.
Any client that owns a KVM server with SSD storage can request an IPv6/64 block.
Thank you all for your patience and interest!