Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


Takes minutes to login to HostCram
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

Takes minutes to login to HostCram

mwtmwt Member
edited December 2021 in Help

It takes anywhere from 1-10 minutes to login to my HostCram node. Does anyone else have this issue or have any idea how to fix it?

This happens with a fresh image and it happens both through SSH and VNC. When connecting via SSH, the delay occurs at this point in the process:

debug1: channel 0: new [client-session]
debug2: channel 0: send open
debug1: Requesting [email protected]
debug1: Entering interactive session.
debug1: pledge: filesystem full
~~~~~~~~~~~~~~~~~
30-180 second delay
~~~~~~~~~~~~~~~~~
debug1: client_input_global_request: rtype [email protected] want_reply 0

I tried checking the usual suspects like bash_history and bashrc, but these files are fine. The delay happens both for root and my user. It hangs with password auth as well as with keys.

When I first login after a while, it always takes 10 minutes. If I exit and then login again, it usually takes less, but always at least a minute.

Comments

  • LXC? I just mask the systemd-logind

    Thanked by 1mwt
  • Me too, I also get "Uh oh! We can't reach your node. " from Dash Board.

  • @Coffee said:
    LXC? I just mask the systemd-logind

    Yes, it's LXC. Is this normal for LXC?

    Thanks! I'll give this a try.

  • ShakibShakib Member, Patron Provider

    Looking into that.

    Thanked by 1mwt
  • mwtmwt Member
    edited December 2021

    @RecD said:
    Me too, I also get "Uh oh! We can't reach your node. " from Dash Board.

    I now have this as well and cannot connect at all. I thought I was just waiting the 10 minutes, but it timed out fully this time.

  • @mwt said: Is this normal for LXC?

    No idea since I only have 1 active VPS with LXC today. But it worked for Hazi.ro's LXC.
    systemctl mask systemd-logind

    Thanked by 1mwt
  • ShakibShakib Member, Patron Provider

    Please do a recheck.

    If there is still any issues i will try my best to help you out.

  • @Shakib said:
    Please do a recheck.

    If there is still any issues i will try my best to help you out.

    Panel is fixed!

    @Coffee said:

    @mwt said: Is this normal for LXC?

    No idea since I only have 1 active VPS with LXC today. But it worked for Hazi.ro's LXC.
    systemctl mask systemd-logind

    This did the trick. Login is fast now!

  • @mwt said:

    @Shakib said:
    Please do a recheck.

    If there is still any issues i will try my best to help you out.

    Panel is fixed!

    @Coffee said:

    @mwt said: Is this normal for LXC?

    No idea since I only have 1 active VPS with LXC today. But it worked for Hazi.ro's LXC.
    systemctl mask systemd-logind

    This did the trick. Login is fast now!

    Did you ever raise a ticket?

  • @Coffee said:

    @mwt said: Is this normal for LXC?

    No idea since I only have 1 active VPS with LXC today. But it worked for Hazi.ro's LXC.
    systemctl mask systemd-logind

    Any idea what this command does and does it have any impact?

  • @Nekki said:

    @mwt said:

    @Shakib said:
    Please do a recheck.

    If there is still any issues i will try my best to help you out.

    Panel is fixed!

    @Coffee said:

    @mwt said: Is this normal for LXC?

    No idea since I only have 1 active VPS with LXC today. But it worked for Hazi.ro's LXC.
    systemctl mask systemd-logind

    This did the trick. Login is fast now!

    Did you ever raise a ticket?

    Yes, but was told to figure it out for myself. This is one of those $7/yr BF deals. So, it's already losing money without support.

    Thanked by 2Nekki Erisa
  • ShakibShakib Member, Patron Provider

    @mwt said:

    @Nekki said:

    @mwt said:

    @Shakib said:
    Please do a recheck.

    If there is still any issues i will try my best to help you out.

    Panel is fixed!

    @Coffee said:

    @mwt said: Is this normal for LXC?

    No idea since I only have 1 active VPS with LXC today. But it worked for Hazi.ro's LXC.
    systemctl mask systemd-logind

    This did the trick. Login is fast now!

    Did you ever raise a ticket?

    Yes, but was told to figure it out for myself. This is one of those $7/yr BF deals. So, it's already losing money without support.

    Sorry. My bad. Had too much work at that time.

  • @mwt said:

    @Nekki said:

    @mwt said:

    @Shakib said:
    Please do a recheck.

    If there is still any issues i will try my best to help you out.

    Panel is fixed!

    @Coffee said:

    @mwt said: Is this normal for LXC?

    No idea since I only have 1 active VPS with LXC today. But it worked for Hazi.ro's LXC.
    systemctl mask systemd-logind

    This did the trick. Login is fast now!

    Did you ever raise a ticket?

    Yes, but was told to figure it out for myself. This is one of those $7/yr BF deals. So, it's already losing money without support.

    My deal LXC-4G has some troubles yesterday, after I contacted @Shakib , everything seems sorted.

  • @Shakib said:

    @mwt said:

    @Nekki said:

    @mwt said:

    @Shakib said:
    Please do a recheck.

    If there is still any issues i will try my best to help you out.

    Panel is fixed!

    @Coffee said:

    @mwt said: Is this normal for LXC?

    No idea since I only have 1 active VPS with LXC today. But it worked for Hazi.ro's LXC.
    systemctl mask systemd-logind

    This did the trick. Login is fast now!

    Did you ever raise a ticket?

    Yes, but was told to figure it out for myself. This is one of those $7/yr BF deals. So, it's already losing money without support.

    Sorry. My bad. Had too much work at that time.

    Fair play, shit happens. Taking accountability is to be respected.

    Thanked by 2Shakib ViridWeb
  • @Shakib said:

    @mwt said:

    @Nekki said:

    @mwt said:

    @Shakib said:
    Please do a recheck.

    If there is still any issues i will try my best to help you out.

    Panel is fixed!

    @Coffee said:

    @mwt said: Is this normal for LXC?

    No idea since I only have 1 active VPS with LXC today. But it worked for Hazi.ro's LXC.
    systemctl mask systemd-logind

    This did the trick. Login is fast now!

    Did you ever raise a ticket?

    Yes, but was told to figure it out for myself. This is one of those $7/yr BF deals. So, it's already losing money without support.

    Sorry. My bad. Had too much work at that time.

    It's ok. Hopefully, now if someone else has this same issue, they can find the solution here instead of having to make a ticket. It's annoying to have to deal with tickets from each "half the cost of an IP" service.

  • @plumberg said: what this command does

    To prevent systemd-logind being started?

    @plumberg said: does it have any impact?

    There is some issues mentioned on this page

    • restarting ssh will then kill all active ssh sessions
    • in Debian 10, X11 did not start any more

    I haven't checked those, but so far no issue for me.

  • It seems that this is necessary if nesting is disabled on the host.

  • @mwt said: Yes, but was told to figure it out for myself. This is one of those $7/yr BF deals. So, it's already losing money without support.

    Provider now needs to teach clients system administration with the VPS/dedi package? Nice.

  • My LXC-4G feels like going down hill now.

    The performance is not as usual. Maybe there are a lot of abuser now.

    Thu Dec  2 05:55:06 UTC 2021
    
    Basic System Information:
    ---------------------------------
    Processor  : 11th Gen Intel(R) Core(TM) i9-11900K @ 3.50GHz
    CPU cores  : 2 @ 3804.380 MHz
    AES-NI     : ✔ Enabled
    VM-x/AMD-V : ✔ Enabled
    RAM        : 4.0 GiB
    Swap       : 5.0 GiB
    Disk       : 78.2 GiB
    
    fio Disk Speed Tests (Mixed R/W 50/50):
    ---------------------------------
    Block Size | 4k            (IOPS) | 64k           (IOPS)
      ------   | ---            ----  | ----           ----
    Read       | 1.50 GB/s   (375.3k) | 2.37 GB/s    (37.0k)
    Write      | 1.50 GB/s   (376.3k) | 2.38 GB/s    (37.2k)
    Total      | 3.00 GB/s   (751.6k) | 4.76 GB/s    (74.3k)
               |                      |
    Block Size | 512k          (IOPS) | 1m            (IOPS)
      ------   | ---            ----  | ----           ----
    Read       | 112.46 MB/s    (219) | 2.89 GB/s     (2.8k)
    Write      | 118.43 MB/s    (231) | 3.09 GB/s     (3.0k)
    Total      | 230.89 MB/s    (450) | 5.99 GB/s     (5.8k)
    
  • @Fritz said: My LXC-4G feels like going down hill now.

    The performance is not as usual. Maybe there are a lot of abuser now.

    Everyone YABs'ing like motherfuckers.

  • @Nekki said:

    @Fritz said: My LXC-4G feels like going down hill now.

    The performance is not as usual. Maybe there are a lot of abuser now.

    Everyone YABs'ing like motherfuckers.

    Oh my, I'm adding the load on the server too. Haha..

  • ShakibShakib Member, Patron Provider
    edited December 2021

    @Fritz said:
    My LXC-4G feels like going down hill now.

    The performance is not as usual. Maybe there are a lot of abuser now.

    Thu Dec  2 05:55:06 UTC 2021
    
    Basic System Information:
    ---------------------------------
    Processor  : 11th Gen Intel(R) Core(TM) i9-11900K @ 3.50GHz
    CPU cores  : 2 @ 3804.380 MHz
    AES-NI     : ✔ Enabled
    VM-x/AMD-V : ✔ Enabled
    RAM        : 4.0 GiB
    Swap       : 5.0 GiB
    Disk       : 78.2 GiB
    
    fio Disk Speed Tests (Mixed R/W 50/50):
    ---------------------------------
    Block Size | 4k            (IOPS) | 64k           (IOPS)
      ------   | ---            ----  | ----           ----
    Read       | 1.50 GB/s   (375.3k) | 2.37 GB/s    (37.0k)
    Write      | 1.50 GB/s   (376.3k) | 2.38 GB/s    (37.2k)
    Total      | 3.00 GB/s   (751.6k) | 4.76 GB/s    (74.3k)
               |                      |
    Block Size | 512k          (IOPS) | 1m            (IOPS)
      ------   | ---            ----  | ----           ----
    Read       | 112.46 MB/s    (219) | 2.89 GB/s     (2.8k)
    Write      | 118.43 MB/s    (231) | 3.09 GB/s     (3.0k)
    Total      | 230.89 MB/s    (450) | 5.99 GB/s     (5.8k)
    

    This issue is on one node only. The one we put $4/three months clients in.

    We are not limiting anything from our end. I know it's getting abused a bit, some people using very high network I/O and causing I/O delay for the hostnode.

    Many of those VPS will expire soon therefore suspending them now will cause more trouble than it's worth.

    The leftover Disk and Network for this node is sufficient for any real world use, CPU performance shouldn't be an issue as well.

    You can submit an ticket to migrate on another node so you can get the full disk speed. :)

    Edit: Automated backups are running on this node now.

Sign In or Register to comment.