Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


BuyVM Slabs arrive in Miami! Ryzen! Free Snapshots! Free routed /48, & IP load balancing oh my!
New on LowEndTalk? Please Register and read our Community Rules.

BuyVM Slabs arrive in Miami! Ryzen! Free Snapshots! Free routed /48, & IP load balancing oh my!

FranciscoFrancisco Top Provider
edited July 15 in Offers

Hello!

Block storage slabs have arrived in Miami along side our Ryzen 3900x's and other goodies!

Now, on to the extras!

  • Snapshots are free, but limited in count.
  • Backups are available for a cheap fee. We keep 7 daily backups.
  • IP load balancing is available in the form of ECMP. It's completely free, just contact our
    support department and we'll assign you a private ASN that you can use to peer with our route server and announce your floating IP addresses.

  • DDOS protection provided by Path.net.

  • Upload your own ISO's at any time through Stallion!
  • Free routed IPV6 /48 with every service!
  • Free Isolated private LAN's in each location!
  • Free BGP sessions with every service!
  • Free Directadmin, Softaculous, & Blesta licenses with all services!

BLOCK STORAGE SLABS!

  • $1.25/month per 256GB.
  • Increases in increments of 1TB after the 1st 1TB.
  • Maximum of 10TB per Volume.
  • Maximum of 8 Volumes attached to a single Virtual Server.
  • Storage is NVME cached for both reads and writes (over 10TB of active caching!)
  • Storage is connected to all nodes over Infiniband RDMA to give local storage like performance!

ORDER BLOCK STORAGE SLABS HERE! Las Vegas / New York / Luxembourg / Miami


ALL SLABS REQUIRE A SLICE TO OPERATE!

SLICE 512
- 1/8th Core @ 3.9+ GHz on a Ryzen 3900X CPU!
- Fair Share CPU Usage
- 512 MB Memory
- 10 GB NVME Storage
- 1000Mbit Unmetered Bandwidth!
- 1 IPv4 Address

$2.00/month - Las Vegas / New York / Luxembourg / Miami

SLICE 1024
- ¼ Core @ 3.9+ GHz on a Ryzen 3900X CPU!
- Fair Share CPU Usage
- 1024 MB Memory
- 20 GB NVME Storage
- 1000Mbit Unmetered Bandwidth!
- 1 IPv4 Address

$3.50/month - Las Vegas / New York / Luxembourg / Miami

SLICE 2048
- ½ Core @ 3.9+ GHz on a Ryzen 3900X CPU!
- Fair Share CPU Usage
- 2048 MB Memory
- 40 GB NVME Storage
- 1000Mbit Unmetered Bandwidth!
- 1 IPv4 Address

$7.00/month - Las Vegas / New York / Luxembourg / Miami


Francisco

«1

Comments

  • databossdataboss Member

    Let the stampede begin!!!!!!!!!!!!!!!

    Thanked by 1Francisco
  • miumiu Member

    (y) (y) (y) (y) (y) (y) (y) (y) (y) (y)

    Thanked by 1Francisco
  • FoulFoul Member

    Well, shit.

  • ericlsericls Member

    Oh nice! Who's the slab king?

  • Premium Slices + Slabs.. ❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥

    Thanked by 1Francisco
  • jmgcaguiclajmgcaguicla Member
    edited July 16

    All of my 4 slices are now paired

    image

    Thanked by 3Francisco maverickp bdl
  • GaleejGaleej Member

    Flagged as Fraud, can you please release.

  • FranciscoFrancisco Top Provider

    @Galeej said:
    Flagged as Fraud, can you please release.

    Please ticket and we'll get you sorted :)

    Francisco

    Thanked by 1Galeej
  • GaleejGaleej Member

    @Francisco said:

    @Galeej said:
    Flagged as Fraud, can you please release.

    Please ticket and we'll get you sorted :)

    Francisco

    Thanks, #334863

  • DataIdeas-JoshDataIdeas-Josh Member, Provider
    edited July 16

    Woooo.
    Time to Pary!

  • justchiljustchil Member

    Woop woop.

  • gappergapper Member

    Can I attach a slab of 256gb ($1.25) to my vps of 512mb ($2.00) and then install owncloud on it and use it to receive files from other people?

    i mean is the space usable for php applications? or is it for backup porpuses only?

  • FranciscoFrancisco Top Provider

    @gapper said:
    Can I attach a slab of 256gb ($1.25) to my vps of 512mb ($2.00) and then install owncloud on it and use it to receive files from other people?

    i mean is the space usable for php applications? or is it for backup porpuses only?

    Perfectly fine :) it’s your harddrive, do whatever you want with it.

    Francisco

    Thanked by 1gapper
  • bruh21bruh21 Member

    @gapper said:
    Can I attach a slab of 256gb ($1.25) to my vps of 512mb ($2.00) and then install owncloud on it and use it to receive files from other people?

    i mean is the space usable for php applications? or is it for backup porpuses only?

    it is mounted as a disk to your system, so you can do whatever you want with it

  • @bruh21 said:
    it is mounted as a disk to your system, so you can do whatever you want with it

    Yes, it's transparently attached as a block device

  • miaumiau Member
    edited July 17

    Hello @Francisco I used your service for some time last year and it was great.
    Recently I purchased one of your slice in LV again, but the network performance wasn't as good as I remember, so I ran a bench.

    ----------------------------------------------------------------------
    CPU Model             : AMD Ryzen 9 3900X 12-Core Processor
    ..
    OS                    : Ubuntu 20.04.2 LTS
    Arch                  : x86_64 (64 Bit)
    Kernel                : 5.8.0-59-generic
    ..
    Organization          : AS53667 FranTech Solutions
    Location              : Las Vegas / US
    Region                : Nevada
    ------------------------------------------------------------------------
    Node Name        Upload Speed      Download Speed      Latency
    Speedtest.net    27.58 Mbps        411.02 Mbps         56.99 ms
    Shanghai   CT    26.87 Mbps        443.05 Mbps         142.03 ms
    Guangzhou  CU    101.28 Mbps       371.94 Mbps         166.21 ms
    Shenzhen   CU    35.97 Mbps        486.53 Mbps         170.63 ms
    Hongkong   CN    13.57 Mbps        477.05 Mbps         183.09 ms
    Singapore  SG    42.65 Mbps        478.11 Mbps         179.47 ms
    Tokyo      JP    7.40 Mbps         50.95 Mbps          115.49 ms
    

    Don't you think the network outbound is little too slow?

  • alexvolkalexvolk Member

    @miau said: Don't you think the network outbound is little too slow?

    Your bandwidth has been doubled /s.

    Thanked by 1bdl
  • FranciscoFrancisco Top Provider

    @miau said: Don't you think the network outbound is little too slow?

    >

    We can adjust routes as needed. I pull a few of the China ISP's off GTT last night since supposedly it's going via Telia, let me know.

    If you can ticket I can test with you :) I got another client I'm testing with to see which of my 3 providers is good during peak China times.

    Francisco

  • Is there an API to automatically set VPS snapshots?

  • JabJabJabJab Member
    edited November 23

    @yanling said: Is there an API to automatically set VPS snapshots?

    No

    @Franciso said: There's no API for it since then people would just script it and not pay for daily (backup) :P Making snapshots a manual thing is a compromise given we don't charge for them, no matter the size of the VM you're on.

    Francisco

  • @Francisco just placed an order! Says pending. How long does it take to get access to the VPS?

  • @TheBrokenBee said:
    @Francisco just placed an order! Says pending. How long does it take to get access to the VPS?

    Depends, usually less than 24 hours, more if you manage to summon the Great Wall of Karen.

  • ZyraZyra Member

    Time for another slab!

  • @Zyra said:
    Time for another slab!

    Because someone necro’d a months-old thread?

    Thanked by 1Zyra
  • Hi @Francisco @alexvolk - any chance you'll have the 'SLICE 1024' instance size available in Luxembourg soon?

  • FranciscoFrancisco Top Provider

    @fixxation said: Hi @Francisco @alexvolk - any chance you'll have the 'SLICE 1024' instance size available in Luxembourg soon?

    Alex doesn't work for us :)

    I'll ping Karen, but might be a morning thing.

    Thanks for the interest!

    Francisco

    Thanked by 1fixxation
  • Thanks @Francisco - sorry @alexvolk ! :#

  • Daniel15Daniel15 Member
    edited November 23

    @Francisco said: IP load balancing is available in the form of ECMP. It's completely free, just contact our

    support department and we'll assign you a private ASN that you can use to peer with our route server and announce your floating IP addresses.

    How do I get "floating IP addresses"? Also what is ECMP and how does it do load balancing? I tried reading about ECMP and got confused since I haven't really touched networking protocols like that for a very long time.

  • FranciscoFrancisco Top Provider
    edited November 23

    @Daniel15 said: How do I get "floating IP addresses"? Also what is ECMP and how does it do load balancing? I tried reading about ECMP and got confused since I haven't really touched networking protocols like that for a very long time.

    You can ticket and i'll give you a free IP that can be 'floated' between instances.

    ECMP is 'equal cost multi path'. Basically each VPS that you want to take part in the balance will run BGP and talk to our route-server. You'll then 'announce' the floating IP to it.

    Our router will then hash requests to the IP and do its best to spread the load out between them, while doing its best to point the same 'flow' to the same node.

    There's no 'sticky sessions' though since this is load balancing at the network level, not like there's an haproxy instance infront.

    EDIT - It's excellent for stateless things (DNS, basic CDN stuff, etc).

    Francisco

    Thanked by 1Daniel15
  • HxxxHxxx Member

    @Francisco There is not a single buyvm slice available for purchase. Congrats man! They sold fast.

Sign In or Register to comment.